Includes both the Ti100 Thermal Imager and CNX-A3000. This kit allows up to five additional measurements to be captured via Fluke CNX AC current, voltage and iFlex clamp modules.
Includes both the Ti100 Thermal Imager and CNX-A3000. This kit allows up to five additional measurements to be captured via Fluke CNX AC current, voltage and iFlex clamp modules.
Discontinued!
This product has been discontinued and is no longer available.
This is the direct replacement:
| Infrared resolution | 160 x 120 |
| Focus mechanism | Focus-free: ~48" and beyond |
| Thermal sensitivity (NETD) | < 0.10°C at 30°C target temp (100 mK)</td> |
| Temperature measurement range (not calibrated below -10°C) |
-20°C to +250°C |
| Temperature measurement accuracy | ± 2°C or 2 % (at 25°C nominal, whichever is greater) |
| IR-Fusion® Technology | Full infrared only |
| IR-Photonotes® annotation system | - |
| Electronic compass | - |
| Multi-mode video recording | - |
| Voice annotation | - |
| Laser pointer/torch | Laser pointer |
| Streaming video output | - |
| Rechargeable batteries (4+ hours each) |
1 rugged lithium-ion smart battery |
| Ruggedness and reliability | 2-meter drop test, IP54 and integrated lens cap |
| Weight | 0.726 kg |
| Warranty | 2 years, with additional available |
| Specifications | |
| Range | 400.0 A |
| Resolution | 0.1 A |
| Accuracy | 400.0 A: 2 % ± 5 digits (10 Hz to 100 Hz), 2.5 % ± 5 digits (100 Hz to 500 Hz) |
| Inrush | Max displayed reading: 999.9A |
| Crest factor (50 Hz/60 Hz) | 3 at 500 A, 2.5 at 600 A, 1.42 at 1000 A, add 2 % for C.F. > 2 |
| LCD w/backlight | 3½ digits |
| Log rate/interval | 1 sec minimum/adjustable by PC |
| Battery type | 2 AA, NEDA 15 A, IEC LR6 |
| Battery life | 400 hours |
| Memory | Record up to 65,000 readings |
| Unbound listen interval | 5 seconds |
| RF communications | 2.4 GHZ ISM Band |
| RF communication range | 20 Meters |
| Operating temperature | -10°C to +50°C |
| Storage temperature | -40°C to +60°C |
| Operating humidity | 90 % at 35°C, 75 % at 40°C, 45 % at 50°C |
| EMC | EN 61326-1:2006 |
| Safety compliance | EN/IEC 61010-1-030:2010 to 600 V Measurement Category (CAT) III EN/IEC 61010-2-030:2010 EN/IEC 61010-032:2002 |
| Pollution degree | 2 |
| Temperature coefficient | Add 0.1 x (specified accuracy)/°C (< 18°C or > 28°C) |
| Safety rating | CAT III 600 V |
| Certifications | CSA, FCC T68-FWCS IC:6627A-FWCS |
| Ingress Protection (IP) rating | IP42 |
| Size (HxWxD) | 20.3 cm x 7.49 cm x 3.56 cm (8 in x 2.95 in x 1.4 in) |
| Weight | .22 kg (8 oz) |
| Jaw opening | 34 mm (1.33 in) |
Click on a category to view a selection of compatible accessories with the Fluke Ti100/C1A-30Hz Wireless Infrared Temperature Measurement Kit.
Click on a category to view a selection of compatible accessories with the Fluke Ti100/C1A-30Hz Wireless Infrared Temperature Measurement Kit.