What's included with the Fluke Networks MS-POE-WM

Simplifies the testing of voice, data, and video cable, the MicroScanner™ PoE Cable Verifier is a handheld tester designed for communications technicians to verify and troubleshoot ethernet devices. Tests wiring and detects opens, shorts, and split pairs on twisted pair cabling and also detects faults on coaxial cabling. The MicroScanner™ takes results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device.

Features

• Quickly determine if a problem is caused by a bad or unconnected cable, insufficient power, or a Powered Device (PD)
• Ethernet Alliance Certified to IEEE-802.3™ standards for reliable multivendor interoperability
• Information for the Network Engineer to investigate potential switch configuration or malfunctions
• PoE Switch Verification – Determine if a switch port can provide enough power by reporting PoE class (0-8)
• Powered Pairs – Graphically identifies powered pairs. Including Dual Signature where the switch port delivers power on 2 or 4 pairs (802.3bt or PoE ++)
• Active Switch Detection - Determine if a cable is connected to a switch port and port speed up to 10G
• Cable Testing – Identify any shorted, open or crossed wires at both ends, length of each pair, and send tones to find cables
• Validate and troubleshoot your Industrial Ethernet copper cabling
• PoE Injector verification - Display injector voltage level