"Our job is helping you do your job"
Designed for EV charging commissioning, this EV charger analyzer verifies CCID trip current, protective earth (PE) safety, and simulates Control Pilot states while measuring CP waveforms to diagnose EVSE faults. In addition, it connects seamlessly with the Meterlink® App, allowing data transfer and convenient reporting. It is suited for installation, service, and validation of system performance.
Designed for EV charging commissioning, this EV charger analyzer verifies CCID trip current, protective earth (PE) safety, and simulates Control Pilot states while measuring CP waveforms to diagnose EVSE faults. In addition, it connects seamlessly with the Meterlink® App, allowing data transfer and convenient reporting. It is suited for installation, service, and validation of system performance.
Features
Applications
| PE Contact/Pre-Test | Range: 50 V AC/DC Accuracy: ±2.0%, pass/fault at greater than 50 V AC/DC between PE conductor and touch sensor |
| Input Electrical Ratings | 1 Φ: 250 V maximum, 2 Φ: 300 V maximum, 50/60 Hz, maximum 10 A |
| Main Voltage | Range: 300 V Accuracy: ±2.0% |
| Frequency | Range: 2 kHz Accuracy: ±1 Hz |
| Duty Cycle | Range: 100% Accuracy: ±5 digits |
| PP State Indication | Not connected, connected, connected + latch |
| Maximum Charging Current Indication | 13 A, 20 A, 32 A, 63 A |
| CP State Simulation and Waveform | A (disconnected), B (connected), C (charging), D (charging w/ ventilation), E (error occurred), F (error occurred) |
| Voltage Phase Indication | L1, L2, PE, N |
| CCID | Trip current and time: Range: 21 mA AC, 5.59 s Accuracy ±2.0% Range: 6 mA AC, 5.59 s for less than 1.2 s Accuracy: ±1.0% Ramping current (0°, 180°): Range: 6 mA AC in 0.5 mA steps every 100 ms in 1.2 s; 20 mA AC in 1 mA steps every 100 ms in 2 s Accuracy: ±2.0% |
| Loop Impedance | Range: 2.000 kΩ Accuracy: ±1.0% |
| Auto Testing Items | PE contact test, EVSE interface, CCID test, and loop impedance test in settings menu |
| System Power | Battery: rechargeable Li-battery Battery life: 12 hours continuously Auto power off: after approximately 15 minutes of inactivity |
| Display | 3.5" (8.89 cm) TFT-LCD |
| Connector (Built-In) | Connector for NACS station |
| Accessory Converter | NACS to SAE J1772 Type 1 |
| Category Rating | CAT II-300 V |
| Certifications | Certifications: ETL, CE, FCC Safety standards: IEC 61010-1, CAT II-300 V EMC standards: EN61326-1 |
| Connectivity | Wireless technology: Bluetooth BLE Communications protocol: Meterlink Bluetooth range: 32' (10 m) |
| Environmental Conditions | Operating ambient temperature and RH: 14 to 86°F (-10 to 30°C), <85% RH 86 to 104°F (30 to 40°C), <75% RH 104 to 122°F (40 to 50°C), <45% RH Storage temperature and RH: -4 to 140°F (-20 to 60°C), 0 to 80% RH Operating altitude: 6560' (2000 m) Pollution degree: 2 |
| Dimensions | 11.6 x 3.68 x 2" (29.6 x 9.35 x 5 cm) |
| Weight | 1.7 lbs (760 g) |
| PE Contact/Pre-Test | Range: 50 V AC/DC Accuracy: ±2.0%, pass/fault at greater than 50 V AC/DC between PE conductor and touch sensor |
| Input Electrical Ratings | 1 Φ: 250 V maximum, 2 Φ: 300 V maximum, 50/60 Hz, maximum 10 A |
| Main Voltage | Range: 300 V Accuracy: ±2.0% |
| Frequency | Range: 2 kHz Accuracy: ±1 Hz |
| Duty Cycle | Range: 100% Accuracy: ±5 digits |
| PP State Indication | Not connected, connected, connected + latch |
| Maximum Charging Current Indication | 13 A, 20 A, 32 A, 63 A |
| CP State Simulation and Waveform | A (disconnected), B (connected), C (charging), D (charging w/ ventilation), E (error occurred), F (error occurred) |
| Voltage Phase Indication | L1, L2, PE, N |
| CCID | Trip current and time: Range: 21 mA AC, 5.59 s Accuracy ±2.0% Range: 6 mA AC, 5.59 s for less than 1.2 s Accuracy: ±1.0% Ramping current (0°, 180°): Range: 6 mA AC in 0.5 mA steps every 100 ms in 1.2 s; 20 mA AC in 1 mA steps every 100 ms in 2 s Accuracy: ±2.0% |
| Loop Impedance | Range: 2.000 kΩ Accuracy: ±1.0% |
| Auto Testing Items | PE contact test, EVSE interface, CCID test, and loop impedance test in settings menu |
| System Power | Battery: rechargeable Li-battery Battery life: 12 hours continuously Auto power off: after approximately 15 minutes of inactivity |
| Display | 3.5" (8.89 cm) TFT-LCD |
| Connector (Built-In) | Connector for NACS station |
| Accessory Converter | NACS to SAE J1772 Type 1 |
| Category Rating | CAT II-300 V |
| Certifications | Certifications: ETL, CE, FCC Safety standards: IEC 61010-1, CAT II-300 V EMC standards: EN61326-1 |
| Connectivity | Wireless technology: Bluetooth BLE Communications protocol: Meterlink Bluetooth range: 32' (10 m) |
| Environmental Conditions | Operating ambient temperature and RH: 14 to 86°F (-10 to 30°C), <85% RH 86 to 104°F (30 to 40°C), <75% RH 104 to 122°F (40 to 50°C), <45% RH Storage temperature and RH: -4 to 140°F (-20 to 60°C), 0 to 80% RH Operating altitude: 6560' (2000 m) Pollution degree: 2 |
| Dimensions | 11.6 x 3.68 x 2" (29.6 x 9.35 x 5 cm) |
| Weight | 1.7 lbs (760 g) |
