"Our job is helping you do your job"

Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.)

Model: ISDP-015

Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.)-

Downloads: datasheet manual

More Dwyer Products

Ask an Expert

Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.)

Model: ISDP-015

Provides a 4-20 mA process output, a robust NEMA 4X enclosure, plus a large LCD display that can be programmed to read in pressure, velocity or flow. Offers simplified programming via a Menu key that enables the user to select: security level; E.

Provides a 4-20 mA process output, a robust NEMA 4X enclosure, plus a large LCD display that can be programmed to read in pressure, velocity or flow. Offers simplified programming via a Menu key that enables the user to select: security level; E.

Sale Price $1292.16 USD
Regular Price $1412.20 USD
Availability 3 to 4 Weeks
Quantity

Traceable Calibration Certificate Icon

Traceable Calibration Certificate for your Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.)

Traceable Calibration Certificate Icon

Traceable Calibration Certificate for your Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.)

Recommended Accessories

Dwyer A-231 Sheilded Cable (16') with 4-pin M-12 Connection-

Dwyer A-231 Sheilded Cable (16') with 4-pin M-12 Connection

A-231

Dwyer A-295 Cable Gland Connector with 4-pin female M-12 connection-

Dwyer A-295 Cable Gland Connector with 4-pin female M-12 connection

A-295

Dwyer A-438 Surface Mounting Bracket for Series DHII-

Dwyer A-438 Surface Mounting Bracket for Series DHII

A-438

Dwyer MTL5541 Galvanic Isolator, Is, Is626, Sbltx & Pbltx Ser-

Dwyer MTL5541 Galvanic Isolator, Is, Is626, Sbltx & Pbltx Ser

MTL5541

Dwyer MTL7706 Zener Barrier, Is, For Is626, Sbltx & Pbltx Ser-

Dwyer MTL7706 Zener Barrier, Is, For Is626, Sbltx & Pbltx Ser

MTL7706

Dwyer ISDP-015 PRESSURE TRANSMITTER, DIFF, IS, -2.5/+2.5

  • Powered on its two wire loop with 10-35 VDC via its integral M-12 four pin male connector.
  • Provides a 0.5% full scale accuracy on ranges from 0.25" w.c. to 100" w.c. as well as bi-directional models up to 10" w.c.
  • Ideal for monitoring pressures or air flows in hazardous zones having a Class I Div. I Groups A, B, C, D; Class II Div. I Groups E, F, G; Class III Div. I ratings.

Specifications

Service: Air and non-corrosive gases.
Wetted Materials: Ranges 5" and Greater: glass, PVC, silicon, alumina ceramic, epoxy, RTV, gold, aluminum, stainless steel and nickel; Ranges 1" and Lower: stainless steel, silicone, gold, ceramic.
Housing Materials: Aluminum, glass.
Accuracy: ±0.5% at 77°F (25°C) including hysteresis and repeatability (after 1 hour warm-up).
Stability: < ±1% per year.
Pressure Limits: Ranges ? 2.5" w.c.: 2 psi; 5" w.c.: 5 psi; 10" w.c.: 5 psi; 25" w.c.: 5 psi; 50" w.c.: 5 psi; 100" w.c.: 9 psi.
Temperature Limits: -40 to 160°F (-40 to 71.1°C).
Compensated Temperature Limits: 32 to 140°F (0 to 60°C).
Thermal Effects: 0.020%/°F (0.036/°C) from 77°F (25°C).
Power Requirements: 10-35 VDC.
Output Signal: 4-20 mA DC.
Zero & Span Adjustments: Accessible via menus.
Response Time: 250 ms (damping set to 1).
Display: 4 digit LCD 0.6" height.
Electrical Connections: M-12 4 PIN Connector.
Process Connections: 1/8" female NPT.
Enclosure Rating: Designed to meet NEMA 4X (IP66).
Mounting Orientation: Mount unit in horizontal plane.
Weight: 2 lb 10 oz (1.19 kg).
Agency Approvals: FM Intrinsically Safe CLI Div I GR: A, B, C, D; CLII Div I GR: E, F, G; CLIII Div I. CE: CENELEC EN 61326/55024: 2003; IEC 61000-4-2/3/4/6: 2001/2006/2004/2005; CENELEC EN 55011: 2006; 2004/108/EC EMC Directive.

Dwyer ISDP-015 Specifications

Service Air and non-combustible gases
Wetted Materials Ranges 5 "w.c. and Greater: glass, PVC, silicon, alumina ceramic, epoxy, RTV, gold, aluminum, stainless steel and nickel
Ranges 1 "w.c. and Lower: stainless steel, silicone, gold, ceramic
Housing Materials Aluminum, glass
Accuracy ±0.5% at 77°F (25°C) including hysteresis and repeatability (after 1 hour warm-up)
Stability <±1% per year
Pressure Limits Ranges ≤2.5 "w.c.: 2 psi
5 "w.c.: 5 psi
10 "w.c.: 5 psi
25 "w.c.: 5 psi
50 "w.c.: 5 psi
100 "w.c.: 9 psi
Temperature Limits 32 to 140°F (0 to 60°C)
Compensated Temperature Limits 32 to 140°F (0 to 60°C)
Thermal Effects 0.020%/°F (0.036/°C) from 77°F (25°C)
Power Requirements 10 to 35 VDC
Output Signal 4 to 20 mA DC
Zero and Span Adjustments Accessible via menus
Response Time 250 ms (damping set to 1)
Display 4 digit LCD 0.6" height
Electrical Connections M-12 4 PIN Connector
Process Connections ⅛" female NPT
Enclosure Rating Designed to meet NEMA 4X (IP66)
Mounting Orientation Mount unit in vertical plane
Weight 2 lb 10 oz (1.19 kg)
Agency Approvals CE: CENELEC EN 61326/55024: 2003; IEC 61000-4-2/3/4/6: 2001/2006/2004/2005; CENELEC EN 55011: 2006; 2004/108/EC EMC Directive; FM Intrinsically Safe CLI Div I GR: A, B, C, D; CLII Div I GR: E, F, G; CLIII Div I
Click here for complete specifications on the Dwyer ISDP-015

What's included with the Dwyer ISDP-015

  • Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.)
datasheet for the Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.) manual for the Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.)

Click on a category to view a selection of compatible accessories with the Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.).

Dwyer A-231 Sheilded Cable (16') with 4-pin M-12 Connection A-231



Dwyer A-295 Cable Gland Connector with 4-pin female M-12 connection A-295



Dwyer A-438 Surface Mounting Bracket for Series DHII A-438
For use with ISDP pressure transmitters.



Dwyer MTL5541 Galvanic Isolator, Is, Is626, Sbltx & Pbltx Ser MTL5541
Provides total intrinsically safe isolation for communication with Dwyer® pressure transmitters approved for location in hazardous areas. Galvanic isolation eliminates the need for a high integrity earth ground required when using shunt diode type saf.



Dwyer MTL7706 Zener Barrier, Is, For Is626, Sbltx & Pbltx Ser MTL7706
Intrinsically safe (IS) shunt-diode barrier that can be used to communicate with and provide isolations for certain Dwyer® transmitters approved for use in hazardous areas. These barriers limit the amount of energy allowed to pass into the hazardous area, which inhibit ignition in flammable atmospheres.



Dwyer ISDP-015 PRESSURE TRANSMITTER, DIFF, IS, -2.5/+2.5

  • Powered on its two wire loop with 10-35 VDC via its integral M-12 four pin male connector.
  • Provides a 0.5% full scale accuracy on ranges from 0.25" w.c. to 100" w.c. as well as bi-directional models up to 10" w.c.
  • Ideal for monitoring pressures or air flows in hazardous zones having a Class I Div. I Groups A, B, C, D; Class II Div. I Groups E, F, G; Class III Div. I ratings.

Specifications

Service: Air and non-corrosive gases.
Wetted Materials: Ranges 5" and Greater: glass, PVC, silicon, alumina ceramic, epoxy, RTV, gold, aluminum, stainless steel and nickel; Ranges 1" and Lower: stainless steel, silicone, gold, ceramic.
Housing Materials: Aluminum, glass.
Accuracy: ±0.5% at 77°F (25°C) including hysteresis and repeatability (after 1 hour warm-up).
Stability: < ±1% per year.
Pressure Limits: Ranges ? 2.5" w.c.: 2 psi; 5" w.c.: 5 psi; 10" w.c.: 5 psi; 25" w.c.: 5 psi; 50" w.c.: 5 psi; 100" w.c.: 9 psi.
Temperature Limits: -40 to 160°F (-40 to 71.1°C).
Compensated Temperature Limits: 32 to 140°F (0 to 60°C).
Thermal Effects: 0.020%/°F (0.036/°C) from 77°F (25°C).
Power Requirements: 10-35 VDC.
Output Signal: 4-20 mA DC.
Zero & Span Adjustments: Accessible via menus.
Response Time: 250 ms (damping set to 1).
Display: 4 digit LCD 0.6" height.
Electrical Connections: M-12 4 PIN Connector.
Process Connections: 1/8" female NPT.
Enclosure Rating: Designed to meet NEMA 4X (IP66).
Mounting Orientation: Mount unit in horizontal plane.
Weight: 2 lb 10 oz (1.19 kg).
Agency Approvals: FM Intrinsically Safe CLI Div I GR: A, B, C, D; CLII Div I GR: E, F, G; CLIII Div I. CE: CENELEC EN 61326/55024: 2003; IEC 61000-4-2/3/4/6: 2001/2006/2004/2005; CENELEC EN 55011: 2006; 2004/108/EC EMC Directive.

Show More...

Dwyer ISDP-015 Specifications

Service Air and non-combustible gases
Wetted Materials Ranges 5 "w.c. and Greater: glass, PVC, silicon, alumina ceramic, epoxy, RTV, gold, aluminum, stainless steel and nickel
Ranges 1 "w.c. and Lower: stainless steel, silicone, gold, ceramic
Housing Materials Aluminum, glass
Accuracy ±0.5% at 77°F (25°C) including hysteresis and repeatability (after 1 hour warm-up)
Stability <±1% per year
Pressure Limits Ranges ≤2.5 "w.c.: 2 psi
5 "w.c.: 5 psi
10 "w.c.: 5 psi
25 "w.c.: 5 psi
50 "w.c.: 5 psi
100 "w.c.: 9 psi
Temperature Limits 32 to 140°F (0 to 60°C)
Compensated Temperature Limits 32 to 140°F (0 to 60°C)
Thermal Effects 0.020%/°F (0.036/°C) from 77°F (25°C)
Power Requirements 10 to 35 VDC
Output Signal 4 to 20 mA DC
Zero and Span Adjustments Accessible via menus
Response Time 250 ms (damping set to 1)
Display 4 digit LCD 0.6" height
Electrical Connections M-12 4 PIN Connector
Process Connections ⅛" female NPT
Enclosure Rating Designed to meet NEMA 4X (IP66)
Mounting Orientation Mount unit in vertical plane
Weight 2 lb 10 oz (1.19 kg)
Agency Approvals CE: CENELEC EN 61326/55024: 2003; IEC 61000-4-2/3/4/6: 2001/2006/2004/2005; CENELEC EN 55011: 2006; 2004/108/EC EMC Directive; FM Intrinsically Safe CLI Div I GR: A, B, C, D; CLII Div I GR: E, F, G; CLIII Div I
Click here for complete specifications on the Dwyer ISDP-015

What's included with the Dwyer ISDP-015

  • Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.)
datasheet for the Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.) manual for the Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.)

Click on a category to view a selection of compatible accessories with the Dwyer ISDP-015 Intrinsically Safe Differential Pressure Transmitter (-2.5-0-2.5"w.c.).

Dwyer A-231 Sheilded Cable (16') with 4-pin M-12 Connection A-231



Dwyer A-295 Cable Gland Connector with 4-pin female M-12 connection A-295



Dwyer A-438 Surface Mounting Bracket for Series DHII A-438
For use with ISDP pressure transmitters.



Dwyer MTL5541 Galvanic Isolator, Is, Is626, Sbltx & Pbltx Ser MTL5541
Provides total intrinsically safe isolation for communication with Dwyer® pressure transmitters approved for location in hazardous areas. Galvanic isolation eliminates the need for a high integrity earth ground required when using shunt diode type saf.



Dwyer MTL7706 Zener Barrier, Is, For Is626, Sbltx & Pbltx Ser MTL7706
Intrinsically safe (IS) shunt-diode barrier that can be used to communicate with and provide isolations for certain Dwyer® transmitters approved for use in hazardous areas. These barriers limit the amount of energy allowed to pass into the hazardous area, which inhibit ignition in flammable atmospheres.



More Dwyer Products


  • We accept these payment methods:
  • Visa, Master Card, Discover, American Express & PayPal
  • We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.