"Our job is helping you do your job"
Image is for reference only, refer to product info for complete details.
Work with simple and frictionless gauge movement with this differential pressure gauge that can indicate positive, negative, or differential pressure with 1% accuracy. In addition, this gauge features a dual scale, a measuring range of 0 to 20 inWC and 0 to 5 kPa, and a Buna-N diaphragm that allows use with hydrogen.
Work with simple and frictionless gauge movement with this differential pressure gauge that can indicate positive, negative, or differential pressure with 1% accuracy. In addition, this gauge features a dual scale, a measuring range of 0 to 20 inWC and 0 to 5 kPa, and a Buna-N diaphragm that allows use with hydrogen.
Features
Applications
| Service | Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi |
| Housing | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test |
| Accuracy | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60 PA, -6 MM ranges), throughout range at 70°F (21.1°C) |
| Pressure Limits | -20 inHg to 15 psig (-0.677 to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) |
| Enclosure Rating | IP67 |
| Overpressure | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only |
| Temperature Limits | 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option |
| Mounting Orientation | Diaphragm in vertical position |
| Process Connections | ⅛" female NPT duplicate high and low pressure taps one pair side and one pair back |
| Service | Air and non-combustible, compatible gases May be used with hydrogen Pressures must be less than 35 psi |
| Housing | Die cast aluminum case and bezel, with acrylic cover Exterior finish is coated gray to withstand 168 hour salt spray corrosion test |
| Accuracy | ±2% (-HA model ±1) of FS (±3% (-HA ±1.5%) on -0, -100 PA, -125 PA, -10 MM ±4% (-HA ±2%) on -00, -60 PA, -6 MM ranges), throughout range at 70°F (21.1°C) |
| Pressure Limits | -20 inHg to 15 psig (-0.677 to 1.034 bar) MP option: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar) |
| Enclosure Rating | IP67 |
| Overpressure | Relief plug opens at approximately 25 psig (1.72 bar), standard gages only |
| Temperature Limits | 20 to 140°F (-6.67 to 60°C) -20°F (-28°C) with low temperature option |
| Mounting Orientation | Diaphragm in vertical position |
| Process Connections | ⅛" female NPT duplicate high and low pressure taps one pair side and one pair back |
