"Our job is helping you do your job"
Energy & Power Measurement Solutions
Monitoring 24 individual circuits on any combination of single-phase and three-phase systems, this multi-circuit power submeter delivers revenue-grade Class 0.2 accuracy for tenant billing and facility energy tracking. Its four-line display reports live values at the panel, and the meter ships DENTCloud enabled for cloud-based data collection.
Monitoring 24 individual circuits on any combination of single-phase and three-phase systems, this multi-circuit power submeter delivers revenue-grade Class 0.2 accuracy for tenant billing and facility energy tracking. Its four-line display reports live values at the panel, and the meter ships DENTCloud enabled for cloud-based data collection.
PowerScout™ FLEX 24 is Dent's multi-circuit submeter engineered for faster setup, smarter commissioning, and clearer system insight. Replacing the PowerScout™ HD, FLEX simplifies installation, enhances configuration workflows, and delivers accurate, real-time data across a wide range of electrical environments. Whether deploying in the field or overseeing large-scale facilities, FLEX provides the flexibility, performance, and control today's teams need.
FLEXPoint™ configuration software provides a modern interface, guided workflows that reduce setup time, and smarter defaults that eliminate guesswork. FLEXPoint™ GO adds a browser-based web server that configures the meter from any browser with no installation required, suiting quick changes, onsite validation, and field troubleshooting. Virtual Meters assign any CT channel to any load in any combination, so single-phase, split-phase, or three-phase groupings can be created and labelled to match how the site is organized, and those labels follow through to the display, the register data, and the cloud.
Features
Applications
| Key Specifications | |
| Service Type | Single phase, split phase, three phase-four wire (WYE), three phase-three wire (Delta) |
| Current Channels | 24 channels, 0.525 V AC maximum, 333.3 mV CTs, 0 to 4000 A depending on CT |
| Voltage Channels | 90 to 346 V AC line-to-neutral, 600 V line-to-line, CAT III. Two voltage reference inputs |
| Accuracy | 0.2%, ANSI C12.1-2024 Class 0.2 |
| Measurement Type | True RMS using high-speed digital signal processing with continuous sampling |
| Display | 4-line display, tri-color backlight (PhaseChek™) |
| Electrical | |
| Power | From L1 phase to L2 phase. 90 to 600 V AC RMS CAT III, 50/60 Hz, 500 mA AC maximum. Use of the 12 volt auxiliary output requires 100 V AC minimum input voltage |
| AC Protection | 0.5 A fuse, 200 kA interrupt capacity |
| Power Out | Unregulated 12 V DC output, 200 mA, self-resetting fuse |
| Maximum Current Input | 150% of current transducer rating for mV CTs to maintain accuracy. Measure up to 4000 A with RoCoil CTs |
| Line Frequency | 50/60 Hz, 45 to 65 Hz measurable range. Measurement taken L1-N |
| Waveform Sampling | Continuous 7.2 kHz, no blind cycles |
| Parameter Update Rate | 1 second |
| Measurements | Volts, amps, kW, kVAR, kVA, aPF, dPF, kW demand, kVA demand, import (delivered) kWh, export (received) kWh, net kWh, import (delivered) kVAh, export (received) kVAh, net kVAh, import (delivered) kVARh, export (received) kVARh, net kVARh, THD, theta, and frequency. All parameters for each phase and virtual meter |
| Resolution | Values in IEEE-754 single precision floating point format, 32 bit |
| Alarm Output | Under voltage, open collector, 30 V DC maximum |
| Pulse Inputs | Two inputs. 3.3 V sourcing voltage, current limited, to customer dry contact pulse output. Maximum pulse rate 10 Hz with 50 milliseconds minimum transition time |
| Communications | |
| Hardware | RS-485, Ethernet, and USB for configuration only |
| Supported Protocols | Modbus RTU, BACnet MS/TP, Modbus TCP or BACnet IP, DENTCloud (enabled) |
| Maximum Communication Length | 1200 meters with a data range of 100K bits/second or less |
| Communication Rate | Modbus: 9600, 19200, 38400, 57600, 76800, 115200 baud. BACnet: 9600, 19200, 38400, 76800 baud |
| Data Bits | 8 |
| Parity | None, even, odd |
| Stop Bit | 2, 1 |
| Termination | None provided |
| Mechanical | |
| Wire Connections | 12 to 28 AWG, 600 V AC. Voltage connection must be #14 AWG or larger and rated 600 V AC |
| Mounting | Panel mount enclosure |
| High Voltage Cover | IP30. Available with PS24 enclosure and plate models |
| Operating Temperature | -4 to 140°F (-20 to 60°C). At -20°C the display could be illegible and meter voltage must exceed 100 V AC to power the meter |
| Humidity | 5% to 95% non-condensing |
| Enclosure | ABS plastic, 94-V0 flammability rating. Connections: 1" EMT conduit |
| Enclosure Dimensions | 13.3 x 9.8 x 3.1" (33.7 x 25.1 x 8.0 cm) |
| Circuit Board Dimensions | 8.5 x 8.5 x 2.5" (21.6 x 21.6 x 6.4 cm) |
| Software | |
| Operating System | Windows 11, Windows 10. ARM processors are not supported |
| Communications | USB and Ethernet standard. One USB port required on the PC |
| Security | Two levels of PIN protection, read/write or read-only |
| Certifications | |
| UL Listed (E186827) | Applies to the indoor enclosure version. Conforms to UL Std 61010-1 3rd Edition. Certified to CSA Std C22.2 No. 61010-1 3rd Edition |
| CE | LVD (EN61010-1), EMC (EN61326-1), RoHS 3 (IEC 63000:2018) |
| ANSI C12.1 Class 0.2 | NIST traceable calibration |
| Key Specifications | |
| Service Type | Single phase, split phase, three phase-four wire (WYE), three phase-three wire (Delta) |
| Current Channels | 24 channels, 0.525 V AC maximum, 333.3 mV CTs, 0 to 4000 A depending on CT |
| Voltage Channels | 90 to 346 V AC line-to-neutral, 600 V line-to-line, CAT III. Two voltage reference inputs |
| Accuracy | 0.2%, ANSI C12.1-2024 Class 0.2 |
| Measurement Type | True RMS using high-speed digital signal processing with continuous sampling |
| Display | 4-line display, tri-color backlight (PhaseChek™) |
| Electrical | |
| Power | From L1 phase to L2 phase. 90 to 600 V AC RMS CAT III, 50/60 Hz, 500 mA AC maximum. Use of the 12 volt auxiliary output requires 100 V AC minimum input voltage |
| AC Protection | 0.5 A fuse, 200 kA interrupt capacity |
| Power Out | Unregulated 12 V DC output, 200 mA, self-resetting fuse |
| Maximum Current Input | 150% of current transducer rating for mV CTs to maintain accuracy. Measure up to 4000 A with RoCoil CTs |
| Line Frequency | 50/60 Hz, 45 to 65 Hz measurable range. Measurement taken L1-N |
| Waveform Sampling | Continuous 7.2 kHz, no blind cycles |
| Parameter Update Rate | 1 second |
| Measurements | Volts, amps, kW, kVAR, kVA, aPF, dPF, kW demand, kVA demand, import (delivered) kWh, export (received) kWh, net kWh, import (delivered) kVAh, export (received) kVAh, net kVAh, import (delivered) kVARh, export (received) kVARh, net kVARh, THD, theta, and frequency. All parameters for each phase and virtual meter |
| Resolution | Values in IEEE-754 single precision floating point format, 32 bit |
| Alarm Output | Under voltage, open collector, 30 V DC maximum |
| Pulse Inputs | Two inputs. 3.3 V sourcing voltage, current limited, to customer dry contact pulse output. Maximum pulse rate 10 Hz with 50 milliseconds minimum transition time |
| Communications | |
| Hardware | RS-485, Ethernet, and USB for configuration only |
| Supported Protocols | Modbus RTU, BACnet MS/TP, Modbus TCP or BACnet IP, DENTCloud (enabled) |
| Maximum Communication Length | 1200 meters with a data range of 100K bits/second or less |
| Communication Rate | Modbus: 9600, 19200, 38400, 57600, 76800, 115200 baud. BACnet: 9600, 19200, 38400, 76800 baud |
| Data Bits | 8 |
| Parity | None, even, odd |
| Stop Bit | 2, 1 |
| Termination | None provided |
| Mechanical | |
| Wire Connections | 12 to 28 AWG, 600 V AC. Voltage connection must be #14 AWG or larger and rated 600 V AC |
| Mounting | Panel mount enclosure |
| High Voltage Cover | IP30. Available with PS24 enclosure and plate models |
| Operating Temperature | -4 to 140°F (-20 to 60°C). At -20°C the display could be illegible and meter voltage must exceed 100 V AC to power the meter |
| Humidity | 5% to 95% non-condensing |
| Enclosure | ABS plastic, 94-V0 flammability rating. Connections: 1" EMT conduit |
| Enclosure Dimensions | 13.3 x 9.8 x 3.1" (33.7 x 25.1 x 8.0 cm) |
| Circuit Board Dimensions | 8.5 x 8.5 x 2.5" (21.6 x 21.6 x 6.4 cm) |
| Software | |
| Operating System | Windows 11, Windows 10. ARM processors are not supported |
| Communications | USB and Ethernet standard. One USB port required on the PC |
| Security | Two levels of PIN protection, read/write or read-only |
| Certifications | |
| UL Listed (E186827) | Applies to the indoor enclosure version. Conforms to UL Std 61010-1 3rd Edition. Certified to CSA Std C22.2 No. 61010-1 3rd Edition |
| CE | LVD (EN61010-1), EMC (EN61326-1), RoHS 3 (IEC 63000:2018) |
| ANSI C12.1 Class 0.2 | NIST traceable calibration |
