"Our job is helping you do your job"
The precision A-scan thickness gauge is used in the aerospace, automotive, stamping, and precision machining industries with versatility and transducer options that offer a measuring range from very thin to extremely thick, with exceptional resolution.
The precision A-scan thickness gauge is used in the aerospace, automotive, stamping, and precision machining industries with versatility and transducer options that offer a measuring range from very thin to extremely thick, with exceptional resolution.
Features
Applications
| Measurement Modes | |
| Pulse-Echo (P-E) | Contact transducers |
| Echo-Echo (E-E) | Contact transducers |
| Echo-Echo Verify (E-EV) | Contact transducers |
| Interface-Echo (I-E) | Delay Line and Pencil transducers |
| Interface-Echo-Echo (I-E-E) | Delay Line and Pencil transducers |
| Pulser | Square wave pulser with adjustable pulse width (spike, thin, wide) |
| Receiver | Manual or AGC gain control with 110 dB range, varies with mode selected. Adjustable damping (35, 50, 75, 300, 600 and 1500 Ω) |
| Timing | Precision TCXO timing with single shot 100 MHz 8 bit ultra low power digitizer |
| Measuring | |
| Units | English and Metric |
| Interface-Echo Mode | Steel 0.050 to 1.0" (1.27 to 25.4 mm) Plastics from 0.005" (0.127 mm) |
| Interface-Echo-Echo Mode | Steel 0.006 to 0.500" (0.152 to 12.7 mm) |
| Pulse-Echo Contact | Steel 0.040" to 30.0' (1 mm to 9.14 m) |
| Echo-Echo Contact | Steel 0.100 to 3.0' (2.54 to 91.44 cm) |
| Echo-Echo Verify Contact | Steel 0.100 to 6.0" (2.54 to 152.4 mm) |
| Resolution (Selectable) | ± 0.001" (0.01 mm) ± 0.0001" (0.001 mm) |
| Velocity Range | 0.0122 to 0.7300 inches/μs (309.88 to 18542 meters/sec) |
| Display Views | |
| A-Scan | Rectified ± (flaw view) RF (full waveform view) Refresh rate at 25 Hz (b&w), 60 Hz (color) Portrait and Landscape views |
| B-Scan | Time based cross section view Display speed variable (10 to 200 readings per second) |
| Large Digits | 0.565" (14.35 mm) |
| Scan Bar | Speed 10 to 33 Hz Viewable in B-Scan and Large Digit views |
| Bar Graph | Measurement stability |
| General Specifications | |
| Transducer | Single Contact, Delay Line & Pencil (1 to 25MHz) Locking quick disconnect LEMO "00" connector |
| Display | 1/4 VGA AMOLED color display (320 x 240 pixels) Viewable area 1.7 x 2.27" (43.2 x 57.6 mm) 60 Hz screen refresh rate |
| Memory | Log Formats: Grid (Alpha Numeric), or Sequential (Auto Identifier) Capacity: 4 GB internal SD card Screen Capture: Bitmap graphic capture for quick documentation (.tif ) OBSTRUCT to indicate inaccessible locations |
| Data Output | USB-C port Windows® PC interface software |
| Case | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) |
| Operating Temperature | 14 to 140°F (-10 to 60°C) |
| Power Source | Line Power: USB-C to PC or power outlet Batteries: 3 x AA cells Alkaline - 12 hrs Nicad - 5 hrs NI-MH - 12 hrs Power saving DIM, auto power off if idle 5 minutes Battery status icon |
| Connections | Output: Direct USB-C 1.1 PC connectivity Transducer connector: LEMO 00 |
| Keyboard | Membrane switch pad with twelve tactile keys |
| Dimensions | 2.5 x 6.5 x 1.24" (63.5 x 165 x 31.5 mm) |
| Weight | 13.5 oz (with batteries) |
| Certification | Factory calibration traceable to NIST & MILSTD-45662A |
| Measurement Modes | |
| Pulse-Echo (P-E) | Contact transducers |
| Echo-Echo (E-E) | Contact transducers |
| Echo-Echo Verify (E-EV) | Contact transducers |
| Interface-Echo (I-E) | Delay Line and Pencil transducers |
| Interface-Echo-Echo (I-E-E) | Delay Line and Pencil transducers |
| Pulser | Square wave pulser with adjustable pulse width (spike, thin, wide) |
| Receiver | Manual or AGC gain control with 110 dB range, varies with mode selected. Adjustable damping (35, 50, 75, 300, 600 and 1500 Ω) |
| Timing | Precision TCXO timing with single shot 100 MHz 8 bit ultra low power digitizer |
| Measuring | |
| Units | English and Metric |
| Interface-Echo Mode | Steel 0.050 to 1.0" (1.27 to 25.4 mm) Plastics from 0.005" (0.127 mm) |
| Interface-Echo-Echo Mode | Steel 0.006 to 0.500" (0.152 to 12.7 mm) |
| Pulse-Echo Contact | Steel 0.040" to 30.0' (1 mm to 9.14 m) |
| Echo-Echo Contact | Steel 0.100 to 3.0' (2.54 to 91.44 cm) |
| Echo-Echo Verify Contact | Steel 0.100 to 6.0" (2.54 to 152.4 mm) |
| Resolution (Selectable) | ± 0.001" (0.01 mm) ± 0.0001" (0.001 mm) |
| Velocity Range | 0.0122 to 0.7300 inches/μs (309.88 to 18542 meters/sec) |
| Display Views | |
| A-Scan | Rectified ± (flaw view) RF (full waveform view) Refresh rate at 25 Hz (b&w), 60 Hz (color) Portrait and Landscape views |
| B-Scan | Time based cross section view Display speed variable (10 to 200 readings per second) |
| Large Digits | 0.565" (14.35 mm) |
| Scan Bar | Speed 10 to 33 Hz Viewable in B-Scan and Large Digit views |
| Bar Graph | Measurement stability |
| General Specifications | |
| Transducer | Single Contact, Delay Line & Pencil (1 to 25MHz) Locking quick disconnect LEMO "00" connector |
| Display | 1/4 VGA AMOLED color display (320 x 240 pixels) Viewable area 1.7 x 2.27" (43.2 x 57.6 mm) 60 Hz screen refresh rate |
| Memory | Log Formats: Grid (Alpha Numeric), or Sequential (Auto Identifier) Capacity: 4 GB internal SD card Screen Capture: Bitmap graphic capture for quick documentation (.tif ) OBSTRUCT to indicate inaccessible locations |
| Data Output | USB-C port Windows® PC interface software |
| Case | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) |
| Operating Temperature | 14 to 140°F (-10 to 60°C) |
| Power Source | Line Power: USB-C to PC or power outlet Batteries: 3 x AA cells Alkaline - 12 hrs Nicad - 5 hrs NI-MH - 12 hrs Power saving DIM, auto power off if idle 5 minutes Battery status icon |
| Connections | Output: Direct USB-C 1.1 PC connectivity Transducer connector: LEMO 00 |
| Keyboard | Membrane switch pad with twelve tactile keys |
| Dimensions | 2.5 x 6.5 x 1.24" (63.5 x 165 x 31.5 mm) |
| Weight | 13.5 oz (with batteries) |
| Certification | Factory calibration traceable to NIST & MILSTD-45662A |
