"Our job is helping you do your job"
The data logging ultrasonic thickness gauge is designed to measure the thickness of various materials with an accuracy as high as ±0.001"es, or ±0.01 millimeters. It comes with a time-based B-Scan as well as an alphanumeric data logger.
The data logging ultrasonic thickness gauge is designed to measure the thickness of various materials with an accuracy as high as ±0.001"es, or ±0.01 millimeters. It comes with a time-based B-Scan as well as an alphanumeric data logger.
Features
Applications
| Ultrasonic Specifications | |
| Measurement Modes | Pulse-Echo (flaws, pits) Echo-Echo (thru-paint) |
| Pulsers | 150 volt square wave pulser |
| Receiver | Manual or AGC gain control with 50dB range, depending on mode selected |
| Timing | Precision TCXO timing with single shot 100 MHz 8 bit ultra low power digitizer |
| Power Source | |
| Line Power | USB to PC or power outlet |
| Batteries | Three AA cells. Alkaline - 35 hrs, Nicad - 10 hrs and NI-MH - 35hrs Auto power off if idle 5 minutes Battery status icon |
| Measuring Specifications | |
| Range | Pulse-Echo Mode (P-E) - (Pit and Flaw Detection) measures from 0.025 in. to 100 ft. (0.63 mm to 30.48 M) Echo-Echo Mode (E-E) - (Thru Paint and Coatings) measures from 0.100 to 6.0 in (2.54 to 152.4 mm). Range will vary andplusmn; depending on the coating. |
| Resolution | ±0.001 inches (0.01 mm) |
| Velocity Range | 0.0122 to 0.7300 inches/φs 309.88 to 18542 meters/sec Single and Two point calibration option, or selection of basic material types |
| Transducer Specifications | |
| Transducer Types | Dual Element (1 to 10 MHz) Locking quick disconnect LEMO "00" connectors Standard 4 foot cable Custom transducers and cable lengths available for special applications |
| Memory Specifications | |
| Data Structure | Grid (alpha numeric) |
| Screen Capture | Bitmap graphic capture for quick documentation (.tif ) |
| Capacity | 4 Gb internal SD card |
| Data Output | USB-C 1.1 PC and OSX connectivity |
| Display Specifications | |
| Large Digits | Standard thickness view Digit Height: 0.700 in (17.78 mm) |
| B-Scan | Time based cross section view. Display speed variable (10 to 200 readings per second) |
| Scan Bar | Speed 10 Hz. Viewable in B-Scan and Large Digit views |
| Bar Graph | Indicates stability of measurement. Viewable in B-Scan and Large Digit views |
| General Specifications | |
| Operating Temperature | -14° to 140°F (-10° to 60°C) |
| Dimensions | 2.5 x 6.5 x 1.24" (63.5 x 165 x 31.5 mm) |
| Weight | 13.5 oz (0.38 kg) with batteries |
| Ultrasonic Specifications | |
| Measurement Modes | Pulse-Echo (flaws, pits) Echo-Echo (thru-paint) |
| Pulsers | 150 volt square wave pulser |
| Receiver | Manual or AGC gain control with 50dB range, depending on mode selected |
| Timing | Precision TCXO timing with single shot 100 MHz 8 bit ultra low power digitizer |
| Power Source | |
| Line Power | USB to PC or power outlet |
| Batteries | Three AA cells. Alkaline - 35 hrs, Nicad - 10 hrs and NI-MH - 35hrs Auto power off if idle 5 minutes Battery status icon |
| Measuring Specifications | |
| Range | Pulse-Echo Mode (P-E) - (Pit and Flaw Detection) measures from 0.025 in. to 100 ft. (0.63 mm to 30.48 M) Echo-Echo Mode (E-E) - (Thru Paint and Coatings) measures from 0.100 to 6.0 in (2.54 to 152.4 mm). Range will vary andplusmn; depending on the coating. |
| Resolution | ±0.001 inches (0.01 mm) |
| Velocity Range | 0.0122 to 0.7300 inches/φs 309.88 to 18542 meters/sec Single and Two point calibration option, or selection of basic material types |
| Transducer Specifications | |
| Transducer Types | Dual Element (1 to 10 MHz) Locking quick disconnect LEMO "00" connectors Standard 4 foot cable Custom transducers and cable lengths available for special applications |
| Memory Specifications | |
| Data Structure | Grid (alpha numeric) |
| Screen Capture | Bitmap graphic capture for quick documentation (.tif ) |
| Capacity | 4 Gb internal SD card |
| Data Output | USB-C 1.1 PC and OSX connectivity |
| Display Specifications | |
| Large Digits | Standard thickness view Digit Height: 0.700 in (17.78 mm) |
| B-Scan | Time based cross section view. Display speed variable (10 to 200 readings per second) |
| Scan Bar | Speed 10 Hz. Viewable in B-Scan and Large Digit views |
| Bar Graph | Indicates stability of measurement. Viewable in B-Scan and Large Digit views |
| General Specifications | |
| Operating Temperature | -14° to 140°F (-10° to 60°C) |
| Dimensions | 2.5 x 6.5 x 1.24" (63.5 x 165 x 31.5 mm) |
| Weight | 13.5 oz (0.38 kg) with batteries |
