"Our job is helping you do your job"

Dakota MMX-6 DL ER Ultrasonic Wall Thickness Gauge Plus 1000 Point Datalogging, Extended Range

Model: MMX-6 DL ER | Order No: Z-143-0002

Dakota MMX-6 DL ER Ultrasonic Wall Thickness Gauge Plus 1000 Point Datalogging, Extended Range-

Downloads: datasheet manual

More Dakota Ultrasonics Products

Ask an Expert

Dakota MMX-6 DL ER Ultrasonic Wall Thickness Gauge Plus 1000 Point Datalogging, Extended Range

Model: MMX-6 DL ER | Order No: Z-143-0002

Through paint thickness gauge includes all features of MMX-6 plus an internal data logger that stores a total of 1000 readings in 10 files of 100 readings per file. This model provides the ability to store, and download the stored measurements directly to a PC using the DakView software program.

Through paint thickness gauge includes all features of MMX-6 plus an internal data logger that stores a total of 1000 readings in 10 files of 100 readings per file. This model provides the ability to store, and download the stored measurements directly to a PC using the DakView software program.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Dakota Ultrasonics ZX-6 DL Data Logging Ultrasonic Multi-Echo Thickness Gauge, 32Mb -

Dakota Ultrasonics ZX-6 DL Data Logging Ultrasonic Multi-Echo Thickness Gauge, 32Mb

Model: ZX-6-DL | Order No: Z-306-0003

Featuring a multi-echo thickness gauge with paint measurement capability, and the ability to locate blind surface pitting and internal defects/flaws in materials. Based on the same operating principles as sonar, it is capable of measuring the thickness of various materials with an accuracy as high as ±0.001", and offers data storage.

Learn More

Recommended Accessories

Dakota F-000-7001 V-Block Ultrasonic Transducer Holder-

Dakota F-000-7001 V-Block Ultrasonic Transducer Holder

F-000-7001

Dakota N-204-0020 4' Transducer Cable, Dual Lemo to Microdot-

Dakota N-204-0020 4' Transducer Cable, Dual Lemo to Microdot

N-204-0020

Dakota N-204-1000 4' Transducer Cable, Dual Lemo to Lemo (Armored) -

Dakota N-204-1000 4' Transducer Cable, Dual Lemo to Lemo (Armored)

N-204-1000

Dakota T-102-2700 5.0 MHz Dual Element Transducer, 1/4", Side Entry-

Dakota T-102-2700 5.0 MHz Dual Element Transducer, 1/4", Side Entry

T-102-2700

Dakota T-104-9700 3.5 MHz Dual Element Transducer, 1/2", Side entry-

Dakota T-104-9700 3.5 MHz Dual Element Transducer, 1/2", Side entry

T-104-9700

Dakota T-212-2001 5.0 MHz Dual Element Transducer, 1/4", Microdot Connector-

Dakota T-212-2001 5.0 MHz Dual Element Transducer, 1/4", Microdot Connector

T-212-2001

Dakota Ultrasonics MMX-6 DL ER Offers

The MMX-6DL has all the features of the MMX-6 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. This gives the user the ability to store, and download the stored measurements directly to a PC using our DakView software program (Windows or MAC OSX). The software and transfer cable are included with the MMX-6DL kit.

Features

  • internal data logger that stores a total of 1000 readings in 10 files of 100 readings per file
  • Multi-Mode: Toggle between Pit/Flaw detection (Pulse Echo Mode), and through Paint/Coatings (Echo-Echo Mode) with the single press of a button
  • Alarm Mode: Enter a minimum acceptable thickness value
  • If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate
  • Data Ouput: RS232 output sends thickness readings to a computer or other external storage device
  • Multi-function 4.5 digit liquid crystal display with 0.500" numerals, backlit for use in poor light conditions
  • Factory calibration traceable to national standards
  • With 5 year limited warranty

Applications

  • Corrosion & Pitting
  • Tube & Pipe
  • Tanks
  • Boilers
  • Glass

Dakota Ultrasonics MMX-6 DL ER Specifications

Operating Temperature -20 to 120°F (-20 to 50°C)
Case Materials Extruded Aluminum Body
Nickel Plated Aluminum End Caps
Pulse Echo Mode (Pit & Flaw Detection) 0.025 to 19.999" (0.63 to 500 mm)
Echo Echo Mode (Thru Paint & Coatings) 0.100 to 1.0" (2.54 to 25.4 mm)
Resolution 0.001" (0.01 mm)
Velocity Range 0.0492 to 0.3937 in/µs (1250 to 10,000 m/s)
Power Source 2 x 1.5V Alkaline Batteries or 1.2V NiCad AA Cells
Battery Life Typically operates for 200 hours on alkaline and 130 hours on NiCad
Dimensions 2.5 x 4.75 x 1.25"
Weight 10 oz
Click here for complete specifications on the Dakota Ultrasonics MMX-6 DL ER

What's included with the Dakota Ultrasonics MMX-6 DL ER

  • Thickness Gauge
  • NIST-Traceable Calibration Certificate
  • Probe
  • 4 oz Bottle of Coupling Fluid
  • 2 x AA Batteries
  • Operating Instruction Manual
  • Carry Case
datasheet for the Dakota MMX-6 DL ER Ultrasonic Wall Thickness Gauge Plus 1000 Point Datalogging, Extended Range manual for the Dakota MMX-6 DL ER Ultrasonic Wall Thickness Gauge Plus 1000 Point Datalogging, Extended Range

Click on a category to view a selection of compatible accessories with the Dakota MMX-6 DL ER Ultrasonic Wall Thickness Gauge Plus 1000 Point Datalogging, Extended Range.

Dakota F-000-7001 V-Block Ultrasonic Transducer Holder F-000-7001
Bell shaped spring loaded probe holder. For 3/16" & 1/4" transducers only.



Dakota T-102-2700 5.0 MHz Dual Element Transducer, 1/4", Side Entry T-102-2700
For use with Dakota ultrasonic thickness gauges. Hi Damped allows for increased resolution for through paint or coating measurements.



Dakota T-104-9700 3.5 MHz Dual Element Transducer, 1/2", Side entry T-104-9700
For use with Dakota ultrasonic thickness gauges. Hi Damped allows for increased resolution for through paint or coating measurements.



Dakota T-212-2001 5.0 MHz Dual Element Transducer, 1/4", Microdot Connector T-212-2001
For use with Dakota ultrasonic thickness gauges. Hi Temp allows you to measure up to 900°F with intermittent contact. It is necessary to cool the transducer, by submerging the transducer in water between readings, when measuring high temperatures.



Dakota N-204-0020 4' Transducer Cable, Dual Lemo to Microdot N-204-0020
For use with Dakota ultrasonic thickness gauges.



Dakota N-204-1000 4' Transducer Cable, Dual Lemo to Lemo (Armored) N-204-1000
For use with Dakota ultrasonic thickness gauges.



Dakota X-000-0001 Calibration Blocks, 5 Steps, 0.100" to 0.500" X-000-0001
For use with Dakota ultrasonic thickness gauges.



Dakota X-000-0002 Calibration Blocks, 4 Steps, 0.250 to 1.0" X-000-0002
For use with Dakota ultrasonic thickness gauges.



Dakota Ultrasonics MMX-6 DL ER Offers

The MMX-6DL has all the features of the MMX-6 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. This gives the user the ability to store, and download the stored measurements directly to a PC using our DakView software program (Windows or MAC OSX). The software and transfer cable are included with the MMX-6DL kit.

Features

  • internal data logger that stores a total of 1000 readings in 10 files of 100 readings per file
  • Multi-Mode: Toggle between Pit/Flaw detection (Pulse Echo Mode), and through Paint/Coatings (Echo-Echo Mode) with the single press of a button
  • Alarm Mode: Enter a minimum acceptable thickness value
  • If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate
  • Data Ouput: RS232 output sends thickness readings to a computer or other external storage device
  • Multi-function 4.5 digit liquid crystal display with 0.500" numerals, backlit for use in poor light conditions
  • Factory calibration traceable to national standards
  • With 5 year limited warranty

Applications

  • Corrosion & Pitting
  • Tube & Pipe
  • Tanks
  • Boilers
  • Glass
Show More...

Dakota Ultrasonics MMX-6 DL ER Specifications

Operating Temperature -20 to 120°F (-20 to 50°C)
Case Materials Extruded Aluminum Body
Nickel Plated Aluminum End Caps
Pulse Echo Mode (Pit & Flaw Detection) 0.025 to 19.999" (0.63 to 500 mm)
Echo Echo Mode (Thru Paint & Coatings) 0.100 to 1.0" (2.54 to 25.4 mm)
Resolution 0.001" (0.01 mm)
Velocity Range 0.0492 to 0.3937 in/µs (1250 to 10,000 m/s)
Power Source 2 x 1.5V Alkaline Batteries or 1.2V NiCad AA Cells
Battery Life Typically operates for 200 hours on alkaline and 130 hours on NiCad
Dimensions 2.5 x 4.75 x 1.25"
Weight 10 oz
Click here for complete specifications on the Dakota Ultrasonics MMX-6 DL ER

What's included with the Dakota Ultrasonics MMX-6 DL ER

  • Thickness Gauge
  • NIST-Traceable Calibration Certificate
  • Probe
  • 4 oz Bottle of Coupling Fluid
  • 2 x AA Batteries
  • Operating Instruction Manual
  • Carry Case
datasheet for the Dakota MMX-6 DL ER Ultrasonic Wall Thickness Gauge Plus 1000 Point Datalogging, Extended Range manual for the Dakota MMX-6 DL ER Ultrasonic Wall Thickness Gauge Plus 1000 Point Datalogging, Extended Range

Click on a category to view a selection of compatible accessories with the Dakota MMX-6 DL ER Ultrasonic Wall Thickness Gauge Plus 1000 Point Datalogging, Extended Range.

Dakota F-000-7001 V-Block Ultrasonic Transducer Holder F-000-7001
Bell shaped spring loaded probe holder. For 3/16" & 1/4" transducers only.



Dakota T-102-2700 5.0 MHz Dual Element Transducer, 1/4", Side Entry T-102-2700
For use with Dakota ultrasonic thickness gauges. Hi Damped allows for increased resolution for through paint or coating measurements.



Dakota T-104-9700 3.5 MHz Dual Element Transducer, 1/2", Side entry T-104-9700
For use with Dakota ultrasonic thickness gauges. Hi Damped allows for increased resolution for through paint or coating measurements.



Dakota T-212-2001 5.0 MHz Dual Element Transducer, 1/4", Microdot Connector T-212-2001
For use with Dakota ultrasonic thickness gauges. Hi Temp allows you to measure up to 900°F with intermittent contact. It is necessary to cool the transducer, by submerging the transducer in water between readings, when measuring high temperatures.



Dakota N-204-0020 4' Transducer Cable, Dual Lemo to Microdot N-204-0020
For use with Dakota ultrasonic thickness gauges.



Dakota N-204-1000 4' Transducer Cable, Dual Lemo to Lemo (Armored) N-204-1000
For use with Dakota ultrasonic thickness gauges.



Dakota X-000-0001 Calibration Blocks, 5 Steps, 0.100" to 0.500" X-000-0001
For use with Dakota ultrasonic thickness gauges.



Dakota X-000-0002 Calibration Blocks, 4 Steps, 0.250 to 1.0" X-000-0002
For use with Dakota ultrasonic thickness gauges.



More Dakota Ultrasonics Products


  • We accept these payment methods:
  • Visa, Master Card, Discover, American Express & PayPal
  • We also accept wire transfers/EFT, cheques and purchase orders on approved credit. Accepted payment methods vary by country.