Crowcon TPU-02-XX-C Triple Plus+ Non-Pumped 3-Gas Detector with Charger, CH4 %LEL/O2/H2S

Model: TPU-02-XX-C

Crowcon TPU-02-XX-C Triple Plus+ Non-Pumped 3-Gas Detector with Charger, CH4 %LEL/O2/H2S

Model: TPU-02-XX-C

This multi-gas detector detects 3 toxic gases, including CH4 (% LEL), O2 and H2S, and it comes with a charger. The gas detector features LIBRA lithium-ion battery technology and an IR sensor option for flammable hydrocarbons or carbon dioxide measurements.

This multi-gas detector detects 3 toxic gases, including CH4 (% LEL), O2 and H2S, and it comes with a charger. The gas detector features LIBRA lithium-ion battery technology and an IR sensor option for flammable hydrocarbons or carbon dioxide measurements.

Discontinued!

This product has been discontinued and is no longer available.
This is the direct replacement:

Crowcon Gas-Pro Portable 5 Gas Detector-

Crowcon Gas-Pro Portable 5 Gas Detector

Model: GAS-PRO SERIES

A portable detector monitoring up to 5 gases, including H₂S, CO, and oxygen depletion, with a compact design and pre-entry check.


Crowcon TPU-02-XX-C Offers

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers, including a selection of flammable gas correction factors (so 1 unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Features

  • Piercing 85dB alarm at 3.28ft (1m) - gives you confidence in the status of your Triple Plus+, and the environment you're working in
  • Vivid LED alarms with top visibility
  • Confidence blip, low battery and TWA warnings
  • Timed data logging with 100-hour capacity
  • Wide range of electrochemical oxygen and toxic gas sensors - allows you to create your optimum 4 gas Triple Plus+
  • Available for diffusion, manual aspiration or pumped sampling
  • Interchangeable sensor modules
  • Comprehensive data logging with site and user names
  • Triax™ casing will not crack or shatter when dropped - system integrity and operation assured
  • Unique internal design will resist the harshest treatment
  • Full buoyancy - makes recovery from water possible
  • Simple Windows Software interface - user menus allow calibration with or without connecting to a PC
  • QuickCal for rapid calibration

Crowcon TPU-02-XX-C Specifications

Alarms
Piercing, rapid intermittent, piezo-electric tone 85dB at 3.28ft (1m); Confidence blip (selectable); Distinctive double blip for low battery with user accept
Gas hazard: vivid flashing red LED Instrument is working: slow flashing green LED Low battery: distinctive double flash of green LED
Display
2 lines of 24 characters, dot matrix high-contrast LCD with back light operating for 30 minutes; Values and units for up to 4 gases displayed simultaneously at current, TWA or peak levels; Low battery, pump failure, real time and elapsed time, calibration and configuration data also displayed
Data Logging
Adjustable sample rate, 100 hours at 1 minute sample rate (maximum 6,000 data points per channel), logging of events, user and site
Battery
Rechargeable Li-ion battery pack
Standard instrument >12 hours
Pumped instrument >10 hours
Charging: Dual rate drop-in charger; Dual rate charger/PC interface
Expected Sensor Life
Flammable: 5 years (Triple Plus+)
IR: 5 years (Triple Plus+ IR)
Toxic: 3 years
Oxygen: 2 years
Typical Response Times
Methane 20s (Triple Plus+); IR 20s (Triple Plus+IR); Oxygen 10s; typical Toxic Gas 20s
Sampling
Optional internal electric pump with on/off button
Operating Temperature
-4 to 122°F (-20 to 50°C)
Size
4.65 x 7.8 x 2.9in (118 x 200 x 73mm)
Weight
31oz (880g) gas

What's included with the Crowcon TPU-02-XX-C

  • Multigas Detector
  • Charger
  • Shoulder Strap
  • Allen Keys
  • Manual

Click on a category to view a selection of compatible accessories with the Crowcon TPU-02-XX-C Triple Plus+ Non-Pumped 3-Gas Detector with Charger, CH4 %LEL/O2/H2S.

Crowcon C01985 Single Sensor Calibration Adapter for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01985
Use this single-sensor calibration adapter with your existing Triple Plus+ and Triple Plus+ IR multigas detectors.




Crowcon C01439 Australia Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01439
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the Australian region.




Crowcon C011321 Single-Way Drop-In Charger with Multi-Region Power Supply C011321
Use this single-way, drop-in charger with a multi-region power supply that has UK, EU, US and Australian plug adapters with your existing Triple Plus+ multi-gas detector.




Crowcon C01438 Europe Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01438
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the European region.




Crowcon C01626 South Africa Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01626
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the South African region.




Crowcon C01440 International Charger/Interface II Without Plug for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01440
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector.




Crowcon C01437 USA Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01437
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the USA region.




Crowcon C03580 Multi-Region Power Supply for Gasman, Tetra 3 and Triple Plus+ Multi-Gas Detectors C03580
Use this multi-region power supply with your existing Gasman, Tetra 3 or Triple Plus+ multi-gas detector. The power supply comes with plug adapters for the UK, EU, US and Australia.




Crowcon H2TRPEC Hydrogen Electrochemical Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 4% H2TRPEC
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen electrochemical gas at levels from 0 to 4%.




Crowcon F2TRP Fluorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm F2TRP
This fluorine gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.




Crowcon HFTRP Hydrogen Fluoride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HFTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen fluoride gas at levels from 0 to 10ppm.




Crowcon ETOTRP Ethylene Oxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm ETOTRP
This ethylene oxide gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.




Crowcon VOTRP Volatile Organics Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm VOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects volatile organics at levels from 0 to 100ppm.




Crowcon ASH3TRP Arsine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1 ppm ASH3TRP
With a range of 0 to 1 ppm, this sensor for your Triple Plus+ multi-gas detector measures levels of arsine.




Crowcon PH3TRP Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm PH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects phosphine gas at levels from 0 to 2ppm.




Crowcon PH3TRPUK Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm, UK Alarms PH3TRPUK
Made to work with your Triple Plus+ multi-gas detector, this gas sensor with UK alarms detects phosphine gas at levels from 0 to 2ppm.




Crowcon CLO2TRP Chlorine Dioxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 1ppm CLO2TRP
With a 0 to 1ppm measurement range, this chlorine dioxide gas sensor is designed to check for chlorine dioxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon NH3TRP1000 Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm NH3TRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 1,000ppm.




Crowcon NH3TRP Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm NH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 50ppm.




Crowcon HCNTRP Hydrogen Cyanide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25ppm HCNTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen cyanide gas at levels from 0 to 25ppm.




Crowcon COTRP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm COTRP
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon S011371 Oxygen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25% S011371
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects oxygen gas at levels from 0 to 25%.




Crowcon H2TRPDR Single Hydrogen or Dual Range with H2TRP Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10% Vol H2TRPDR
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects single hydrogen or a dual range with H2TRP gas at levels from 0 to 10% volume.




Crowcon CH4TRPDRVOL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRVOL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.




Crowcon CH4TRPDRLEL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRLEL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.




Crowcon FLAMTRPAUS Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, AUS Alarms FLAMTRPAUS
This flammable gas sensor features a 0 to 100% LEL range and AUS alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.




Crowcon FLAMTRPUSA Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, USA Alarms FLAMTRPUSA
This flammable gas sensor features a 0 to 100% LEL range and USA alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.




Crowcon H2TRP Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL H2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 100% LEL.




Crowcon C2H4TRP Ethylene Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C2H4TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for ethylene gas and features a range of 0 to 100% LEL.




Crowcon C4H10TRP Butane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C4H10TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for butane gas and features a range of 0 to 100% LEL.




Crowcon C5H12TRP Pentane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C5H12TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for pentane gas and features a range of 0 to 100% LEL.




Crowcon C3H8TRP Propane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C3H8TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for propane gas and features a range of 0 to 100% LEL.




Crowcon COTRPUSA Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, US Alarms COTRPUSA
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features a US alarm.




Crowcon COTRPAUS Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, AUS Alarm COTRPAUS
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features an AUS alarm.




Crowcon COTRPCOMP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, H2 Compensated COTRPCOMP
With a 0 to 500ppm measurement range, this carbon monoxide (H2 compensated) gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon HCLTRP Hydrogen Chloride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HCLTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen chloride gas at levels from 0 to 10ppm.




Crowcon CL2TRP Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm CL2TRP
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector.




Crowcon CL2TRPUK Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm, UK Alarm CL2TRPUK
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector. The sensor features a UK alarm.




Crowcon NO2TRP Nitrogen Dioxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm NO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitrogen dioxide gas at levels from 0 to 10ppm.




Crowcon NOTRP Nitric Oxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm NOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitric oxide gas at levels from 0 to 100ppm.




Crowcon H2TRPPPM Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2,000ppm H2TRPPPM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 2,000ppm.




Crowcon SO2TRP Sulphur Dioxide Gas Sensor with Hydrogen Sulphide Immune for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm SO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects sulphur dioxide gas at levels from 0 to 10ppm.




Crowcon H2STRP1000 Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm H2STRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 1,000ppm.




Crowcon H2STRPAUS Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, AUS Alarms H2STRPAUS
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has AUS alarms built in.




Crowcon H2STRPUSA Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, US Alarms H2STRPUSA
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has US alarms built in.




Crowcon H2STRPALM Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, Almeer (0 to 200ppm) H2STRPALM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.




Crowcon H2STRP Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm H2STRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.




Crowcon CH4TRP Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL CH4TRP
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector.




Crowcon C03141 Drop Line for Triple Plus+ Multi-Gas Detectors, 19.69ft C03141
Undertake pre-entry checks with your existing Triple Plus+ multi-gas detector with help from this 19.69ft (6m) drop line.




Crowcon FIL29001 In-Line Water Trap/Particulate Filter for Triple Plus+ and Triple Plus+ IR Gas Detectors FIL29001
Safeguard your Triple Plus+ or Triple Plus+ IR multi-gas detector from particles and moisture with help from this in-line water trap/particulate filter.




Crowcon M04032/X Standard Sampling Hose for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M04032/X
Supplied by the meter, this standard sampling hose works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.




Crowcon C01757 Telescopic Sample Probe for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors, 33.46 to 61.02in C01757
Use this telescoping sample probe, which extends from 33.46 to 61.02in (85 to 155cm), with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The sample probe allows you to sample remotely, such as into chambers during re-entry checks.




Crowcon C01097 Rigid Sample Probe for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors, 3.28ft C01097
Designed for sampling remotely, including during re-entry checks, this rigid sample probe works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.




Crowcon M05809 Top Label Protective Film for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M05809
Compatible with Triple Plus+ and Triple Plus+ IR multi-gas detectors, this self-adhesive film provides extra protection to your unit's keypad and display.




Crowcon C01325 Baffle Plate for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01325
Use this baffle plate with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The baffle plate helps protect sensor apertures in extreme conditions, including by helping to reduce splash and sand ingress.




Crowcon C01323 Shoulder Strap for Triple Plus+ Multi-Gas Detectors C01323
Use this shoulder strap with your existing Triple Plus+ multi-gas detector. The strap includes slips for simple attachment.




Crowcon C01007 Carrying Case and Belt for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors C01007
Easily transport your Triple Plus+ or Triple Plus+ IR multi-gas detector with this carrying case and belt combo.




Crowcon C01685 Aspirator Kit with Pouch for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01685
Use this kit, which includes an aspirator bulb, a flow plate and 6.56 (2m) of standard sampling hose, with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The kit helps enable manual sampling.




Crowcon TPU-02-XX-C Offers

Intrinsically safe, the Triple Plus+ provides enhanced facilities for safety and detector fleet managers, including a selection of flammable gas correction factors (so 1 unit can be used in several locations across a site) and annotation of the data file with user names and site names selected from pre-configured files in the unit.

Features

  • Piercing 85dB alarm at 3.28ft (1m) - gives you confidence in the status of your Triple Plus+, and the environment you're working in
  • Vivid LED alarms with top visibility
  • Confidence blip, low battery and TWA warnings
  • Timed data logging with 100-hour capacity
  • Wide range of electrochemical oxygen and toxic gas sensors - allows you to create your optimum 4 gas Triple Plus+
  • Available for diffusion, manual aspiration or pumped sampling
  • Interchangeable sensor modules
  • Comprehensive data logging with site and user names
  • Triax™ casing will not crack or shatter when dropped - system integrity and operation assured
  • Unique internal design will resist the harshest treatment
  • Full buoyancy - makes recovery from water possible
  • Simple Windows Software interface - user menus allow calibration with or without connecting to a PC
  • QuickCal for rapid calibration

Crowcon TPU-02-XX-C Specifications

Alarms
Piercing, rapid intermittent, piezo-electric tone 85dB at 3.28ft (1m); Confidence blip (selectable); Distinctive double blip for low battery with user accept
Gas hazard: vivid flashing red LED Instrument is working: slow flashing green LED Low battery: distinctive double flash of green LED
Display
2 lines of 24 characters, dot matrix high-contrast LCD with back light operating for 30 minutes; Values and units for up to 4 gases displayed simultaneously at current, TWA or peak levels; Low battery, pump failure, real time and elapsed time, calibration and configuration data also displayed
Data Logging
Adjustable sample rate, 100 hours at 1 minute sample rate (maximum 6,000 data points per channel), logging of events, user and site
Battery
Rechargeable Li-ion battery pack
Standard instrument >12 hours
Pumped instrument >10 hours
Charging: Dual rate drop-in charger; Dual rate charger/PC interface
Expected Sensor Life
Flammable: 5 years (Triple Plus+)
IR: 5 years (Triple Plus+ IR)
Toxic: 3 years
Oxygen: 2 years
Typical Response Times
Methane 20s (Triple Plus+); IR 20s (Triple Plus+IR); Oxygen 10s; typical Toxic Gas 20s
Sampling
Optional internal electric pump with on/off button
Operating Temperature
-4 to 122°F (-20 to 50°C)
Size
4.65 x 7.8 x 2.9in (118 x 200 x 73mm)
Weight
31oz (880g) gas

What's included with the Crowcon TPU-02-XX-C

  • Multigas Detector
  • Charger
  • Shoulder Strap
  • Allen Keys
  • Manual

Click on a category to view a selection of compatible accessories with the Crowcon TPU-02-XX-C Triple Plus+ Non-Pumped 3-Gas Detector with Charger, CH4 %LEL/O2/H2S.

Crowcon C01985 Single Sensor Calibration Adapter for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01985
Use this single-sensor calibration adapter with your existing Triple Plus+ and Triple Plus+ IR multigas detectors.




Crowcon C01439 Australia Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01439
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the Australian region.




Crowcon C011321 Single-Way Drop-In Charger with Multi-Region Power Supply C011321
Use this single-way, drop-in charger with a multi-region power supply that has UK, EU, US and Australian plug adapters with your existing Triple Plus+ multi-gas detector.




Crowcon C01438 Europe Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01438
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the European region.




Crowcon C01626 South Africa Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01626
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the South African region.




Crowcon C01440 International Charger/Interface II Without Plug for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01440
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector.




Crowcon C01437 USA Charger/Interface II for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01437
Use this charger/interface with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The charger is designed to work for the USA region.




Crowcon C03580 Multi-Region Power Supply for Gasman, Tetra 3 and Triple Plus+ Multi-Gas Detectors C03580
Use this multi-region power supply with your existing Gasman, Tetra 3 or Triple Plus+ multi-gas detector. The power supply comes with plug adapters for the UK, EU, US and Australia.




Crowcon H2TRPEC Hydrogen Electrochemical Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 4% H2TRPEC
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen electrochemical gas at levels from 0 to 4%.




Crowcon F2TRP Fluorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm F2TRP
This fluorine gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.




Crowcon HFTRP Hydrogen Fluoride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HFTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen fluoride gas at levels from 0 to 10ppm.




Crowcon ETOTRP Ethylene Oxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 10ppm ETOTRP
This ethylene oxide gas sensor works with your Triple Plus+ multi-gas detector and has a measurement range of 0 to 10ppm.




Crowcon VOTRP Volatile Organics Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm VOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects volatile organics at levels from 0 to 100ppm.




Crowcon ASH3TRP Arsine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1 ppm ASH3TRP
With a range of 0 to 1 ppm, this sensor for your Triple Plus+ multi-gas detector measures levels of arsine.




Crowcon PH3TRP Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm PH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects phosphine gas at levels from 0 to 2ppm.




Crowcon PH3TRPUK Phosphine Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2ppm, UK Alarms PH3TRPUK
Made to work with your Triple Plus+ multi-gas detector, this gas sensor with UK alarms detects phosphine gas at levels from 0 to 2ppm.




Crowcon CLO2TRP Chlorine Dioxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 1ppm CLO2TRP
With a 0 to 1ppm measurement range, this chlorine dioxide gas sensor is designed to check for chlorine dioxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon NH3TRP1000 Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm NH3TRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 1,000ppm.




Crowcon NH3TRP Ammonia Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm NH3TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects ammonia gas at levels from 0 to 50ppm.




Crowcon HCNTRP Hydrogen Cyanide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25ppm HCNTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen cyanide gas at levels from 0 to 25ppm.




Crowcon COTRP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm COTRP
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon S011371 Oxygen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 25% S011371
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects oxygen gas at levels from 0 to 25%.




Crowcon H2TRPDR Single Hydrogen or Dual Range with H2TRP Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10% Vol H2TRPDR
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects single hydrogen or a dual range with H2TRP gas at levels from 0 to 10% volume.




Crowcon CH4TRPDRVOL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRVOL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.




Crowcon CH4TRPDRLEL Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, % LEL/% Vol. Units CH4TRPDRLEL
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector. The sensor supports %LEL and %vol units.




Crowcon FLAMTRPAUS Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, AUS Alarms FLAMTRPAUS
This flammable gas sensor features a 0 to 100% LEL range and AUS alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.




Crowcon FLAMTRPUSA Flammable Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL, USA Alarms FLAMTRPUSA
This flammable gas sensor features a 0 to 100% LEL range and USA alarms to keep you notified. The sensor is made to work with your Triple Plus+ multi-gas detector.




Crowcon H2TRP Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL H2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 100% LEL.




Crowcon C2H4TRP Ethylene Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C2H4TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for ethylene gas and features a range of 0 to 100% LEL.




Crowcon C4H10TRP Butane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C4H10TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for butane gas and features a range of 0 to 100% LEL.




Crowcon C5H12TRP Pentane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C5H12TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for pentane gas and features a range of 0 to 100% LEL.




Crowcon C3H8TRP Propane Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100% LEL C3H8TRP
Made to work with Triple Plus+ multi-gas detectors, this gas sensor tests for propane gas and features a range of 0 to 100% LEL.




Crowcon COTRPUSA Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, US Alarms COTRPUSA
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features a US alarm.




Crowcon COTRPAUS Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, AUS Alarm COTRPAUS
With a 0 to 500ppm measurement range, this carbon monoxide gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector. The sensor features an AUS alarm.




Crowcon COTRPCOMP Carbon Monoxide Gas Sensor for Triple Plus+ Gas Detectors, 0 to 500ppm, H2 Compensated COTRPCOMP
With a 0 to 500ppm measurement range, this carbon monoxide (H2 compensated) gas sensor is designed to check for carbon monoxide levels when used with your compatible Triple Plus+ gas detector.




Crowcon HCLTRP Hydrogen Chloride Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm HCLTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen chloride gas at levels from 0 to 10ppm.




Crowcon CL2TRP Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm CL2TRP
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector.




Crowcon CL2TRPUK Chlorine Gas Sensor for Triple Plus+ Gas Detectors, 0 to 5ppm, UK Alarm CL2TRPUK
With a 0 to 5ppm measurement range, this chlorine gas sensor is designed to check for chlorine levels when used with your compatible Triple Plus+ gas detector. The sensor features a UK alarm.




Crowcon NO2TRP Nitrogen Dioxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm NO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitrogen dioxide gas at levels from 0 to 10ppm.




Crowcon NOTRP Nitric Oxide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 100ppm NOTRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects nitric oxide gas at levels from 0 to 100ppm.




Crowcon H2TRPPPM Hydrogen Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 2,000ppm H2TRPPPM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen gas at levels from 0 to 2,000ppm.




Crowcon SO2TRP Sulphur Dioxide Gas Sensor with Hydrogen Sulphide Immune for Triple Plus+ Multi-Gas Detectors, 0 to 10ppm SO2TRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects sulphur dioxide gas at levels from 0 to 10ppm.




Crowcon H2STRP1000 Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 1,000ppm H2STRP1000
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 1,000ppm.




Crowcon H2STRPAUS Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, AUS Alarms H2STRPAUS
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has AUS alarms built in.




Crowcon H2STRPUSA Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, US Alarms H2STRPUSA
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm and has US alarms built in.




Crowcon H2STRPALM Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm, Almeer (0 to 200ppm) H2STRPALM
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.




Crowcon H2STRP Hydrogen Sulphide Gas Sensor for Triple Plus+ Multi-Gas Detectors, 0 to 50ppm H2STRP
Made to work with your Triple Plus+ multi-gas detector, this gas sensor detects hydrogen sulphide gas at levels from 0 to 50ppm.




Crowcon CH4TRP Methane Gas Sensor for Triple Plus+ Gas Detectors, 0 to 100% LEL CH4TRP
With a 0 to 100% LEL measurement range, this methane gas sensor is designed to check for methane levels when used with your compatible Triple Plus+ gas detector.




Crowcon C03141 Drop Line for Triple Plus+ Multi-Gas Detectors, 19.69ft C03141
Undertake pre-entry checks with your existing Triple Plus+ multi-gas detector with help from this 19.69ft (6m) drop line.




Crowcon FIL29001 In-Line Water Trap/Particulate Filter for Triple Plus+ and Triple Plus+ IR Gas Detectors FIL29001
Safeguard your Triple Plus+ or Triple Plus+ IR multi-gas detector from particles and moisture with help from this in-line water trap/particulate filter.




Crowcon M04032/X Standard Sampling Hose for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M04032/X
Supplied by the meter, this standard sampling hose works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.




Crowcon C01757 Telescopic Sample Probe for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors, 33.46 to 61.02in C01757
Use this telescoping sample probe, which extends from 33.46 to 61.02in (85 to 155cm), with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The sample probe allows you to sample remotely, such as into chambers during re-entry checks.




Crowcon C01097 Rigid Sample Probe for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors, 3.28ft C01097
Designed for sampling remotely, including during re-entry checks, this rigid sample probe works with Triple Plus+ and Triple Plus+ IR multi-gas detectors.




Crowcon M05809 Top Label Protective Film for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors M05809
Compatible with Triple Plus+ and Triple Plus+ IR multi-gas detectors, this self-adhesive film provides extra protection to your unit's keypad and display.




Crowcon C01325 Baffle Plate for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01325
Use this baffle plate with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The baffle plate helps protect sensor apertures in extreme conditions, including by helping to reduce splash and sand ingress.




Crowcon C01323 Shoulder Strap for Triple Plus+ Multi-Gas Detectors C01323
Use this shoulder strap with your existing Triple Plus+ multi-gas detector. The strap includes slips for simple attachment.




Crowcon C01007 Carrying Case and Belt for Triple Plus+ And Triple Plus+ IR Multi-Gas Detectors C01007
Easily transport your Triple Plus+ or Triple Plus+ IR multi-gas detector with this carrying case and belt combo.




Crowcon C01685 Aspirator Kit with Pouch for Triple Plus+ and Triple Plus+ IR Multi-Gas Detectors C01685
Use this kit, which includes an aspirator bulb, a flow plate and 6.56 (2m) of standard sampling hose, with your existing Triple Plus+ or Triple Plus+ IR multi-gas detector. The kit helps enable manual sampling.




More Crowcon Products