Reliable and easy to use, this multi-gas detector monitors H2S and CO and provides affordable protection from atmospheric gas hazards and extended battery life, especially in cold weather. In addition, it features yellow concussion-proof housing and an IP68 rating for maximum protection against dust and water.
Reliable and easy to use, this multi-gas detector monitors H2S and CO and provides affordable protection from atmospheric gas hazards and extended battery life, especially in cold weather. In addition, it features yellow concussion-proof housing and an IP68 rating for maximum protection against dust and water.
Easy to wear, slim, and compact, this gas detector has visual compliance at a glance with the flashing green IntelliFlash™. Moreover, the easy one-button operation reduces training time and lets workers focus on the job.
Features
Applications
| H2S | Measuring range: 0 to 100 ppm Resolution: 1 ppm  | 
        
| CO | Measuring range: 0 to 500 ppm Resolution: 1 ppm  | 
        
| Tests | Audible/visual alarms on activation; sensors, battery and circuitry (continuous) | 
| Alarms | Visual, vibrating, audible (95 dB) Low, High, TWA, STEL, OL (over limit)  | 
        
| User Options | IntelliFlash™ interval Combustible gas measurement (%LEL or % by volume methane) User-settable calibration gas level Force calibration when overdue Low alarm acknowledge Language choices Set custom start-up message  | 
        
| Temperature | -4 to 122°F (-20 to 50°C) | 
| Humidity | 0 to 95% RH (non-condensing) | 
| Ratings | IP68 - up to 45 minutes at 3.9' (1.2 m) EMI/RFI: Complies with EMC Directive 2004/108/EC  | 
        
| Certifications and Approvals | CSA: Class I, Div. 1, Gr. A, B, C, D ATEX: CEEx, II 1 G. Ex ia IIC T4 Ga IECEx: Ex ia IIC T4 Ga CE European Conformity  | 
        
| Expected Service Lifetime | Five years including all sensors Note: Sensors do not contain consumable components and will typically reach the expected lifetime if used according to the instructions in the user manual  | 
        
| Typical Battery Life | 18 hours; recharges in less than 6 hours Note: Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles  | 
        
| Dimensions | 4.4 x 2.4 x 1.2" (11.3 x 6 x 3.2 cm) | 
| Weight | 6.3 oz (179 g) | 
Click on a category to view a selection of compatible accessories with the Honeywell BW MicroClip X3 Series Multi-Gas Detector, H2S/CO, yellow.
| H2S | Measuring range: 0 to 100 ppm Resolution: 1 ppm  | 
        
| CO | Measuring range: 0 to 500 ppm Resolution: 1 ppm  | 
        
| Tests | Audible/visual alarms on activation; sensors, battery and circuitry (continuous) | 
| Alarms | Visual, vibrating, audible (95 dB) Low, High, TWA, STEL, OL (over limit)  | 
        
| User Options | IntelliFlash™ interval Combustible gas measurement (%LEL or % by volume methane) User-settable calibration gas level Force calibration when overdue Low alarm acknowledge Language choices Set custom start-up message  | 
        
| Temperature | -4 to 122°F (-20 to 50°C) | 
| Humidity | 0 to 95% RH (non-condensing) | 
| Ratings | IP68 - up to 45 minutes at 3.9' (1.2 m) EMI/RFI: Complies with EMC Directive 2004/108/EC  | 
        
| Certifications and Approvals | CSA: Class I, Div. 1, Gr. A, B, C, D ATEX: CEEx, II 1 G. Ex ia IIC T4 Ga IECEx: Ex ia IIC T4 Ga CE European Conformity  | 
        
| Expected Service Lifetime | Five years including all sensors Note: Sensors do not contain consumable components and will typically reach the expected lifetime if used according to the instructions in the user manual  | 
        
| Typical Battery Life | 18 hours; recharges in less than 6 hours Note: Approximately 20% capacity loss is normal with lithium polymer batteries after 500 charge cycles  | 
        
| Dimensions | 4.4 x 2.4 x 1.2" (11.3 x 6 x 3.2 cm) | 
| Weight | 6.3 oz (179 g) | 
Click on a category to view a selection of compatible accessories with the Honeywell BW MicroClip X3 Series Multi-Gas Detector, H2S/CO, yellow.