"Our job is helping you do your job"
This load signal generator is for use with Amprobe AT-2000-A series wire tracers.
This load signal generator is for use with Amprobe AT-2000-A series wire tracers.
The Amprobe S2600-A Load Signal Generator is for use with the AT-2000-A Series Advances Wire Tracers. When connected to an energized circuit, the S2600A will rapidly turn itself on and off. This generates a slight, periodic current fluctuation that causes the power line to emit its own, trace-able signal. this signal can be detected all the way back to the main generator.
Features
Applications
| Operating Voltage | 9 - 300 V AC/DC |
| Operating Frequency | 32.768 KHz |
| Duty Cycle | Transmit 2 pulses with a duration of 0.0625 seconds each, every 0.5 seconds |
| Current Output – Low Mode | 35 mA peak, 4 mA average |
| Current Output – High Mode | 70 mA peak, 6 mA average |
| Operating Voltage | 9 - 300 V AC/DC |
| Operating Frequency | 32.768 KHz |
| Duty Cycle | Transmit 2 pulses with a duration of 0.0625 seconds each, every 0.5 seconds |
| Current Output – Low Mode | 35 mA peak, 4 mA average |
| Current Output – High Mode | 70 mA peak, 6 mA average |
