"Our job is helping you do your job"
This Current Probe is designed for use with DMMs, loggers and other instruments that have a current input in utility and industrial environments. The unique ergonomic design allows it to easily clamp onto cables or small bus bars. It is assembled to the highest safety and performance standards including the CE Mark and is UL approved for Canada and United States.
This Current Probe is designed for use with DMMs, loggers and other instruments that have a current input in utility and industrial environments. The unique ergonomic design allows it to easily clamp onto cables or small bus bars. It is assembled to the highest safety and performance standards including the CE Mark and is UL approved for Canada and United States.
This general purpose 1000AAC current probe has a 1000:1 ratio and output of 1mA per amp measured in the jaw. The probe has an integral 5 ft (1.5m) lead terminated shrouded banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift is important. The SR604 works as a traditional current transformer (with a ratio of 1000:1) and provides current outputs in mA/A for use on DMMs, power and harmonic meters, data loggers, recorders or instruments with current ranges.
Features
Applications
| Nominal Range | 1000A |
| Measurement Range | 0.1 to 1200A |
| Transformation Ratio | 1000:1 |
| Output Signal | 1mA AC/A AC: (1A AC at 1000A) |
| Accuracy (1000A Range) | 0.1 to 10A: ≤3% + 0.1A 50A: 1.5% of Reading; 200A: 0.75% of Reading 1000A: 0.5% of Reading 1200A: 0.5% of Reading |
| Phase Shift (1000A Range) | 50A: 1.5° 200A: 0.75° 1000A: 0.5° 1200A: 0.5° |
| Overload | 1200A for 40 min ON, 20 min OFF |
| Frequency Range | 30Hz to 5kHz Current derating above 1kHz using the formula: 1000A x 1/F (in kHz) |
| Load Impedance | 5Ω max |
| Working/Common Mode Voltage | 600V Cat. III |
| Output Termination | Lead |
| Nominal Range | 1000A |
| Measurement Range | 0.1 to 1200A |
| Transformation Ratio | 1000:1 |
| Output Signal | 1mA AC/A AC: (1A AC at 1000A) |
| Accuracy (1000A Range) | 0.1 to 10A: ≤3% + 0.1A 50A: 1.5% of Reading; 200A: 0.75% of Reading 1000A: 0.5% of Reading 1200A: 0.5% of Reading |
| Phase Shift (1000A Range) | 50A: 1.5° 200A: 0.75° 1000A: 0.5° 1200A: 0.5° |
| Overload | 1200A for 40 min ON, 20 min OFF |
| Frequency Range | 30Hz to 5kHz Current derating above 1kHz using the formula: 1000A x 1/F (in kHz) |
| Load Impedance | 5Ω max |
| Working/Common Mode Voltage | 600V Cat. III |
| Output Termination | Lead |
