"Our job is helping you do your job"
This general purpose 1000A AC current probe is designed for use with DMMs, loggers and other instruments that have a current input.
This general purpose 1000A AC current probe is designed for use with DMMs, loggers and other instruments that have a current input.
This current probe has a 1000:1 ratio and output of 1mA per amp measured in the jaw. The unique ergonomic design allows it to easily clamp onto cables or small bus bars. The SR600 has jack output termination that accept 4mm banana plugs. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy and low phase shift is important.
Features
Applications
| Nominal Range | 1000A |
| Measurement Range | 0.1 to 1200A |
| Transformation Ratio | 1000: 1 |
| Output Signal | 1mA AC/A AC: (1A AC at 1000A) |
| Accuracy (1000A Range) | 0.1 to 10A: ≤3% + 0.1A; 50A: 1.5% of Reading 200A: 0.75% of Reading 1000A: 0.5% of Reading 1200A: 0.5% of Reading |
| Phase Shift (1000A Range) | 50A: 1.5° 200A: 0.75° 1000A: 0.5° 1200A: 0.5° |
| Overload | 1200A for 40 min ON, 20 min OFF |
| Frequency Range | 30Hz to 5kHz Current derating above 1kHz using the formula: 1000A x 1/F (in kHz) |
| Load Impedance | 5Ω max |
| Working/Common Mode | Voltage 600V Cat. III |
| Output Termination | Jack |
| Nominal Range | 1000A |
| Measurement Range | 0.1 to 1200A |
| Transformation Ratio | 1000: 1 |
| Output Signal | 1mA AC/A AC: (1A AC at 1000A) |
| Accuracy (1000A Range) | 0.1 to 10A: ≤3% + 0.1A; 50A: 1.5% of Reading 200A: 0.75% of Reading 1000A: 0.5% of Reading 1200A: 0.5% of Reading |
| Phase Shift (1000A Range) | 50A: 1.5° 200A: 0.75° 1000A: 0.5° 1200A: 0.5° |
| Overload | 1200A for 40 min ON, 20 min OFF |
| Frequency Range | 30Hz to 5kHz Current derating above 1kHz using the formula: 1000A x 1/F (in kHz) |
| Load Impedance | 5Ω max |
| Working/Common Mode | Voltage 600V Cat. III |
| Output Termination | Jack |
