Additel AM1710-9-SP Secondary Reference PRT Probe, 9 x 0.188", -40 to 320°F, spade lugs

Model: AM1710-9-SP

Additel AM1710-9-SP Secondary Reference PRT Probe, 9 x 0.188&quot;, -40 to 320&deg;F, spade lugs-

Downloads: datasheet

Additel AM1710-9-SP Secondary Reference PRT Probe, 9 x 0.188", -40 to 320°F, spade lugs

Model: AM1710-9-SP

Built for comparison calibration near ambient, this secondary reference PRT measures from -40 to 320°F and holds ±0.015°C accuracy at the triple point of water. A stainless steel sheath protects the 100 ohm platinum sensor to 160°C on a 0.188" stem just 9" long, while the four spade lugs fit any 4-wire terminal, and an Additel 9071 adapter bridges them to an ADT282.

Your Price	$1275.00 USD
Availability	2 to 3 Weeks
Quantity	Quantity

Additel AM1710-9-SP Offers

Features

100 Ω platinum sensor with a 0.003925 Ω/Ω/°C temperature coefficient, fully meeting the ITS-90 criteria for reference thermometers
Calibrated accuracy of ±0.015°C at the triple point of water, ±0.025°C at -40°C and ±0.025°C at 160°C
Measures -40 to 320°F (-40 to 160°C)
Long term drift under 0.01°C at the triple point of water after 100 hours at 160°C
Short term stability under 0.007°C and hysteresis of 0.005°C
Thermal shock under 0.005°C after 10 thermal cycles from minimum to maximum temperature
Stainless steel sheath protects the sensing element from contamination up to 160°C
32 mm sensing element sits 3 mm from the tip for fast, well-defined immersion
Slim 0.188" (4.775 mm) stem just 9" (228.6 mm) long, sized for small dry wells and tight clearances
6 second response to 63% of a step change in water moving at 1 meter per second
Four-wire spade lugs terminate the leads for any readout that accepts them; an Additel 9071 adapter is required to reach an ADT282 smart connector port
Teflon™ insulated copper leads, 4 conductors, 6.5 feet (2 meters) long
Handle rated -40 to 320°F (-40 to 160°C)

Applications

Comparison calibration of RTDs, thermocouples and thermistors against a reference
Reference channel on a precision thermometer readout
Temperature loop verification in the instrument shop
HVAC/R, food, pharmaceutical and environmental chamber work near ambient
Small dry wells and tight-clearance fixtures

Additel AM1710-9-SP Specifications

Measurement
Temperature Range	-40 to 320°F (-40 to 160°C)
Calibrated Accuracy (k=2)	±0.025°C at -40°C ±0.015°C at 0.01°C ±0.025°C at 160°C
Nominal Resistance at 0.01°C	100 Ω
Temperature Coefficient	0.003925 Ω/Ω/°C
Long Term Drift	<0.01°C at TPW after 100 hours at 160°C
Short Term Stability	<0.007°C
Thermal Shock	<0.005°C after 10 thermal cycles from minimum to maximum temperatures
Hysteresis	0.005°C
Self-Heating	50 mW/°C
Response Time	6 seconds for 63% response to a step change in water moving at 1 meter per second
Sensor Length	1.26" (32 mm)
Sensor Location	0.12" (3 mm) from tip
Insulation Resistance	>1000 MΩ at room temperature
General
Sheath Material	Stainless steel
Sheath Dimensions	0.188" (4.775 mm) OD x 9" (228.6 mm) L
Connector	Four-wire spade lugs
External Leads	Teflon™ insulated copper wire, 4 leads, 6.5 feet (2 meters)
Handle Dimensions	0.39" (10 mm) OD x 1.97" (50 mm) L
Handle Temperature Range	-40 to 320°F (-40 to 160°C)
Calibration	ISO 17025 accredited calibration

Click here for complete specifications on the Additel AM1710-9-SP

What's included with the Additel AM1710-9-SP

Secondary Reference PRT Probe
ISO 17025 Accredited Calibration Certificate

datasheet for the Additel AM1710-9-SP Secondary Reference PRT Probe, 9 x 0.188", -40 to 320°F, spade lugs

Description ➕➖