"Our job is helping you do your job"
Portable and accurate, this automatic handheld pressure calibrator offers touchscreen control for quick pressure setpoint management. In addition, it features a built-in DP50 module/sensor, providing a pressure range of ±50 inH2O (±125 mbar) with 0.05% full scale accuracy and less than 10 seconds of output rate.
Portable and accurate, this automatic handheld pressure calibrator offers touchscreen control for quick pressure setpoint management. In addition, it features a built-in DP50 module/sensor, providing a pressure range of ±50 inH2O (±125 mbar) with 0.05% full scale accuracy and less than 10 seconds of output rate.
The Additel 760A is a high-performance automatic handheld pressure calibrator designed for precision and portability in the field. Weighing less than 4 lbs (1.8 kg), this integrated device replaces bulky manual pumps with a built-in electric pump, internal controller, and a precision pressure sensor. With four distinct channels, including internal pressure, external pressure (2 channels), and electrical measurement, it serves as a comprehensive tool for pressure calibration and maintenance of critical process infrastructure.
The760A/760S-D gives you differential and gauge pressure, but at a higher pressure range than the 760A/760S-LLP. Spanning a range of -12.5 to 35 psi (-0.86 to 2.5 bar) and with an accuracy up to 0.01%FS, the 760A/760S-D is an ideal solution to cover common gauge and differential pressure measurements. The Additel 760A/760S-D comes with an internal module of your choice, with maximum pressure to 35 psi. Lower pressure configurations down to ±10 inH2O differential can be purchased to improve accuracy at lower pressures.
Features
Applications
| Pressure Type | Differential, gauge |
| Pressure Output Rate | <10 seconds (35 psi/5 ml) |
| Connection | Hose, 5 ft (1.5 m), with built-in filter to 1/4" BSPF, 1/4" NPTF, and M20F adapters |
| Accuracy | 0.05% of full span |
| Internal Pressure Module Range | ±50 inH2O (±125 mbar) |
| Media | G |
| Burst Pressure | 3x |
| Stability | 0.005% FS* *Stability based on FS of the internal pressure module. Stability is 0.005% FS or 0.05 Pa whichever is greater. Internal module is switchable |
| Over Range Indication | 120% |
| Resolution | 6 digits |
| Measurement Units | Pa, hPa, kPa, mPa, bar, mbar, psi mmHg at 0°C, cmHg at 0°C, mHg at 0°C, inHg at 0°C inH2O at 4°C, mmH2O at 4°C, cmH2O at 4°C, mH2O at 4°C, mmH2O at 20°C, cmH2O at 20°C, mH2O at 20°C, mH2O at 68°F, inH2O at 20°C kgf/cm2, mtorr, torr, lb/ft2, tsi, custom |
| Channels | Four total: one electronic, one internal pressure, two external pressure (measure only) |
| Display | Color 854 x 480 TFT 4.95-inch touch screen |
| Automation Functions | Switch test, auto step, leak test |
| Misuse Protection | Up to 30 V on any two sockets |
| Multi Lingual Interface | English, German, French, Italian, Spanish, Portuguese, Chinese, Japanese, and Russian |
| Environmental Conditions | Operation: 32 to 122°F (0 to 50°C), 0 to 90% RH, less than 9842' (3000 m) Compensated temperature: 32 to 122°F (0 to 50°C) Storage temperature: -4 to 158°F (-20 to 70°C) Vibration: 4 g (20 to 2000 Hz) Shock: 8 g Enclosure IP rating: IP52 water and dust proof |
| Equipment Durability | Pump: >500,000 cycles Hose and filter: The estimated End of Life (EOL) expectancy for all accessory hoses and filters (pneumatic and hydraulic) is approximately 10 years and should be replaced at the first sign of wear or damage |
| Power | Rechargeable Li-Ion battery, typically 10 hours of operation, recharges in less than 4 hours External power: 110/220 V power adapter 10 V |
| Certification and Compliance | ISO 17025 accredited certificate with data included CE |
| Communications and Software | Bluetooth, WiFi and USB ACal, Land, LogII |
| Dimensions | 9.3 x 4.3 x 2.8" (235 x 110 x 70 mm) |
| Weight | 4 lbs (1.8 kg) |
| Pressure Type | Differential, gauge |
| Pressure Output Rate | <10 seconds (35 psi/5 ml) |
| Connection | Hose, 5 ft (1.5 m), with built-in filter to 1/4" BSPF, 1/4" NPTF, and M20F adapters |
| Accuracy | 0.05% of full span |
| Internal Pressure Module Range | ±50 inH2O (±125 mbar) |
| Media | G |
| Burst Pressure | 3x |
| Stability | 0.005% FS* *Stability based on FS of the internal pressure module. Stability is 0.005% FS or 0.05 Pa whichever is greater. Internal module is switchable |
| Over Range Indication | 120% |
| Resolution | 6 digits |
| Measurement Units | Pa, hPa, kPa, mPa, bar, mbar, psi mmHg at 0°C, cmHg at 0°C, mHg at 0°C, inHg at 0°C inH2O at 4°C, mmH2O at 4°C, cmH2O at 4°C, mH2O at 4°C, mmH2O at 20°C, cmH2O at 20°C, mH2O at 20°C, mH2O at 68°F, inH2O at 20°C kgf/cm2, mtorr, torr, lb/ft2, tsi, custom |
| Channels | Four total: one electronic, one internal pressure, two external pressure (measure only) |
| Display | Color 854 x 480 TFT 4.95-inch touch screen |
| Automation Functions | Switch test, auto step, leak test |
| Misuse Protection | Up to 30 V on any two sockets |
| Multi Lingual Interface | English, German, French, Italian, Spanish, Portuguese, Chinese, Japanese, and Russian |
| Environmental Conditions | Operation: 32 to 122°F (0 to 50°C), 0 to 90% RH, less than 9842' (3000 m) Compensated temperature: 32 to 122°F (0 to 50°C) Storage temperature: -4 to 158°F (-20 to 70°C) Vibration: 4 g (20 to 2000 Hz) Shock: 8 g Enclosure IP rating: IP52 water and dust proof |
| Equipment Durability | Pump: >500,000 cycles Hose and filter: The estimated End of Life (EOL) expectancy for all accessory hoses and filters (pneumatic and hydraulic) is approximately 10 years and should be replaced at the first sign of wear or damage |
| Power | Rechargeable Li-Ion battery, typically 10 hours of operation, recharges in less than 4 hours External power: 110/220 V power adapter 10 V |
| Certification and Compliance | ISO 17025 accredited certificate with data included CE |
| Communications and Software | Bluetooth, WiFi and USB ACal, Land, LogII |
| Dimensions | 9.3 x 4.3 x 2.8" (235 x 110 x 70 mm) |
| Weight | 4 lbs (1.8 kg) |
