"Our job is helping you do your job"
The term Intrinsically Safe (I.S.) and also known as explosion-proof is often used generically to describe products destined for hazardous (explosive) areas. In reality, I.S. is a protection concept based around limiting the available electrical energy to nonincendive levels so that sparks cannot occur from short circuit or failures which could cause an explosive atmosphere to ignite.
Here you'll find an extensive grouping of products that offer you the necessary protection using I.S. standard to keep you and your teams safe for all your applications.
The term Intrinsically Safe (I.S.) and also known as explosion-proof is often used generically to describe products destined for hazardous (explosive) areas. In reality, I.S. is a protection concept based around limiting the available electrical energy to nonincendive levels so that sparks cannot occur from short circuit or failures which could cause an explosive atmosphere to ignite.
Here you'll find an extensive grouping of products that offer you the necessary protection using I.S. standard to keep you and your teams safe for all your applications.
The Mercoid D Series is one of the world's broadest lines of pressure switches. Whatever your application might be, it is most probable it can be fully satisfied with a D Series pressure switch.
Same rugged construction as used in Series 1000W plus explosion-proof design are combined in this unit. UL listed for Class I, Groups A, B, C and D; Class II, Groups E, F and G. Bellville spring movement permits mounting of control in any position and helps prevent contact chatter. Features Visible Setpoint, Fixed Deadband, and Ranges to 1400psi.
CE, UL and CSA listed, FM approved for use in Class I, Div 1, Groups C and D, Class II Groups E, F, and G and Class III hazardous atmospheres NEMA 7 & 9. Raintight NEMA 3 (IP54). Weatherproof features include a drain plug and O-ring seal in cover. Series offers set points from 0.03 to 20" w.c. (7.5 to 5 kPa) and from 0.5 to 60 psi (0.035 to 3.5 bar).
UL listed for use in Class I, Groups A, B, C, & D; Class II, Groups E, F, & G and Class III atmospheres, Directive 94/9/EC (ATEX) Compliant for CE ATEX II 2G Exd IIB+H2 T6, CSA & FM approved for Class I, Div. 1, Groups B, C, D; Class II, Div. 1, Groups E, F, G and Class III atmospheres IECEx Ex d IIB+H2 T6 (-40°C < Ta < 60°C).
Measures positive, negative, or differential pressure of air and natural gases in ranges from 1 "w.c. (0.249 kPa) to 150 psid (10.34 bar). The dual push pads on the front panel control the on/off, auto-zero, and pressure unit selection, allowing for simple operation with no set up needed.
Convert pressure into a standard 4-20 mA output signal. It can be used to accurately measure compatible gases and liquids compatible with its 316SS/316LSS wetted parts. Series IS626 full scale accuracy is 0.25%. Designed for industrial environments with a NEMA 4X (IP66) housing, this transmitter resists most effects of shock and vibration.
Provides a 4 to 20 mA process output, a robust NEMA 4X enclosure, plus a large LCD display that can be programmed to read in pressure, velocity or flow. Features security level, English or Metric engineering units, pressure, velocity or flow operation, K-factor, volumetric flow operation, plus many more.
A microprocessor-based high performance transmitter, which has flexible pressure calibration, push button configuration, and programmable using HART® Communication. The Series 3200G is capable of being configured with the zero and span buttons, a field calibrator is not required for configuration.
Approved for use in hazardous location applications. Intrinsically safe for Class I, II, & I, Div. 1, Groups A, B, C, D, E, F & G; Class I, Zone 0 Aex ia IIC.
