Calibration Kits
Calibration kits offer the most convenient and compact solutions available for carrying everything you need for field pressure calibration work.
All calibration kits start with an extremely rugged carry case, manufactured from high grade ABS plastic, and designed to withstand a drop of up to 2 meters (6 feet). The case is fully sealed and water tight, with a pressure equalization valve to allow easy opening after changes in altitude or temperature. A rigid, die-cut foam insert is custom designed to fit everything you need into the most compact space possible. Your calibrator, pump, fittings, hoses, leads, pipe thread tape, battery, and bottle of hydraulic fluid (if required) fit snugly into precut locations.
Download the datasheet on the right for more information.
Low Pressure and Vacuum Handpumps
CylinderPump
This is the ideal pressure source for calibration of low pressure differential transmitters. It works like a bicycle pump, but with a fine adjustment piston that makes it easy to set the pressure very precisely. On the side of the pump is a vent valve, also designed for precise control, so you can open it very slowly and easily control the rate of change of pressure.
Another valve changes the cylinder handpump into a vacuum pump, expanding the usefulness of the pump. This is an all metal pump and is field rebuildable.
Download the datasheet on the right for more information.
Medium Pressure and Vacuum Handpumps
ComboPump
The ComboPump is our best selling pump because its so versatile. You can use it for low differential pressure transmitters but it can generate up to 500 PSI/ 35 bar/ 3.5 MPa, and its a vacuum pump, too! The unique pressure balanced variable volume lets you set pressure precisely and easily, even at maximum pressure.
Mount a gauge or a calibrator on one of the two pressure ports and use the second port for the device being tested. The result is a complete field pressure calibration system that can be operated with one hand.
Download the datasheet on the right for more information.
High Pressure Handpump
HydraulicPump
The HydraulicPump is a lightweight, high pressure source that can use oil or water as the test fluid, and produces up to 5000 PSI/ 350 bar/ 35 MPa.
There are two pressure ports on the pump: Mount a gauge or calibrator directly to the front of the pump, connect the spare port directly to the device being tested, and you have a complete field pressure calibration system. A hose, and fittings are included along with a convenient plastic bottle to hold your hydraulic test fluid. The built-in variable volume provides a way to set the pressure precisely, and the pump is rebuildable. Two versions of the pump are available with maximum pressure ratings of 3000 PSI/ 200 bar/ 20 MPa or 5000 PSI/ 350 bar/ 35 MPa.
Download the datasheet on the right for more information.
